AC Centrifugal Fan
Product introduction:
VoltageRange: 115VAC/230VAC/400VAC
Frequency: 50-60Hz,
Phase: Single / Three
Comply with RoHS directive
Impeller diameter: 120mm to 630mm.
Certification: UL, CE, CCC, TUV
Characteristics:
1. The impeller and outer-rotor are connected to make full use of space in the AC centrifugal fan.
2. The double-single balance of the whole unit makes the fan operate more smoothly and durably.
3. Operating life is extended by selecting high-end deep groove ball bearings.
4. The built-in thermal protector helps prevent damage to the AC blower.
5. The sealed design of the fan motor can protect against extreme working environments.
6. The engineering of the fan blades results in lower noise and higher efficiency.
Application: HRV, ERV, AHU, FFU, air purifier, portable air conditioner, range hoods, clean room, etc.
Customized service: we have the capabilities to provide you with custom fan solutions depending on your requirements.
AC Centrifugal Fan Φ120-62
Material: Scroll housing and impeller are made of galvanized, sheet steel with powder coating
IP rating: IP23
Bearing: Ball bearings
Operation Mode: S1
Protection: Thermal overload protector (TOP) wired internally
Motor Insulation Class: F
Direction of rotation: Counterclockwise, see on the leads
Approvals: CCC, CE
Working temperature: -40~65℃
Type | Voltage (VAC) | Frequency (Hz) | Airflow (m3 /h) | Airflow (CFM) | Speed (r/min) | Power(W) | Current (A) | Noise LP:dB(A) |
SH120A1-AGT-00 | 230 | 50 | 290 | 170 | 2180 | 81 | 0.37 | 67 |
60 | 298 | 175 | 2210 | 95 | 0.42 | 68 | ||
SH120A1-AC6-00 | 115 | 60 | 272 | 160 | 2070 | 91 | 0.82 | 70 |
AC Centrifugal Fan Φ133-190
Material: Scroll housing and impeller are made of galvanized sheet steel
IP rating: IP23
Bearing: Ball bearings
Operation Mode: S1
Protection: Thermal overload protector (TOP) wired internally
Motor Insulation Class: F
Direction of rotation: Counterclockwise, see on the leads
Approvals: CCC, CE
Working temperature: -40~65℃
Type | Voltage (VAC) | Frequency (Hz) | Airflow (m3 /h) | Airflow (CFM) | Speed (r/min) | Power (W) | Current (A) | Noise LP:dB(A) |
DH133A1-AGT-00 | 230 | 50 | 910 | 535 | 1280 | 275 | 1.2 | 64 |
60 | 830 | 488 | 1140 | 285 | 1.25 | 62 |
AC Centrifugal Fan Φ146-150
Material: Scroll housing is made of plastic PP (V1), impeller is made of galvanized sheet steel
IP rating: IP20
Bearing: Sleeve bearing, set up patent oil-house
Operation Mode: S1
Protection: Thermal overload protector (TOP) wired internally
Motor Insulation Class: F
Direction of rotation: Clockwise, see on the leads
Approvals: CCC, CE
Working temperature: -40~65℃
Type | Voltage (VAC) | Frequency (Hz) | 3 speeds | Airflow (m3/h) | Airflow (CFM) | Speed (r/min) | Power (W) | Current (A) | Noise LP:dB (A) |
DH146A1-AG5-01 | 230 | 50 | H | 850 | 500 | 1984 | 298 | 1.3 | 72 |
M | 600 | 535 | 1422 | 207 | 0.94 | 63 | |||
L | 400 | 235 | 1000 | 178 | 0.82 | 53 |
AC Centrifugal Fan Φ160-62
Material: Impeller is made of galvanized sheet steel
IP rating: IP23
Bearing: Ball bearings
Operation Mode: S1
Protection: Thermal overload protector (TOP) wired internally
Motor Insulation Class: F
Direction of rotation: Counterclockwise, see on the leads
Approvals: CCC, CE
Working temperature: -40~65℃
Type | Voltage (VAC) | Frequency (Hz) | Airflow (m ³ /h) | Airflow (CFM) | Speed (r/min) | Power (W) | Current (A) | Noise LP:dB(A) |
SC160A1-AG5-03 | 230 | 50 | / | / | 2550 | 160 | 0.7 | / |
AC Centrifugal Fan Φ180-90
Material: Scroll housing and impeller are made of galvanized sheet steel
IP rating: IP23
Bearing: Ball bearings
Operation Mode: S1
Protection: Thermal overload protector (TOP) wired internally
Motor Insulation Class: F
Direction of rotation: Counterclockwise, see on the leads
Approvals: CCC, CE
Working temperature: -40~65℃
Type | Voltage (VAC) | Frequency (Hz) | Airflow (m ³ /h) | Airflow (CFM) | Speed (r/min) | Power (W) | Current (A) | Noise LP:dB(A) |
SC160A1-AG5-03 | 230 | 50 | / | / | 2550 | 160 | 0.7 | / |
AC Centrifugal Fan Φ280-288
Material: Scroll housing and impeller are made of galvanized sheet steel
IP rating: IP20
Bearing: Ball bearing
Operation Mode: S1
Protection: Thermal overload protector (TOP) wired internally
Motor Insulation Class: F
Direction of rotation: Counterclockwise, see on the leads
Approvals: CCC, CE
Working temperature: -40~65℃
Type | Voltage (VAC) | Frequency (Hz) | 2 speeds | Airflow (m3/h) | Airflow (CFM) | Speed (r/min) | Power (W) | Current (A) | Noise LP:dB(A) |
DH280A3-AGT-01 | 230 | 60 | H | 3800 | 2240 | 910 | 795 | 3.6 | 70 |
L | 3100 | 1820 | 650 | 620 | 2.9 | 68 |
AC Centrifugal Fan Φ190
Material: Impeller is made of plastic PA66
IP rating: IP23
Bearing: Ball bearing
Operation Mode: S1
Protection: Thermal overload protector (TOP) wired internally
Motor Insulation Class: F
Direction of rotation: Counterclockwise, see on the leads
Approvals: CCC, CE, UL, cUL , TUV
Working temperature: -40~65℃
Type | Voltage (VAC) | Frequency (Hz) | Airflow (m3/h) | Airflow (CFM) | Speed (r/min) | Power (W) | Current (A) | Noise LP:dB(A) |
SC190A1-AC6-12 | 115 | 60 | 520 | 306 | 2590 | 65 | 0.56 | 70 |
SC190A1-AGT-04 | 230 | 50/60 | 540/600 | 320/355 | 2630/2980 | 79/108 | 0.35/0.48 |
AC Centrifugal Fan Φ250
Material: Impeller is made of plastic PA66, galvanized sheet steel plate
IP rating: IP23
Bearing: Ball bearing
Operation Mode: S1
Protection: Thermal overload protector (TOP) wired internally
Motor Insulation Class: F
Direction of rotation: Counterclockwise, see on the leads
Approvals: CCC, CE, UL, cUL , TUV
Working temperature: -40~65℃
Type | Voltage (VAC) | Frequency (Hz) | Airflow (m3/h) | Airflow (CFM) | Speed (r/min) | Power (W) | Current (A) | Noise LP:dB(A) |
SC250A1-AC6-16 | 115 | 60 | 1650 | 976 | 3000 | 290 | 2.6 | 82 |
SC250A1-AGT-06 | 230 | 50/60 | 1300/1380 | 769/817 | 2550/2750 | 173/240 | 0.8/1.1 | 78/80 |
AC Centrifugal Fan Φ355-147
Material: Impeller is made of sheet aluminum
IP rating: IP23
Bearing: Ball bearing
Operation Mode: S1
Protection: Thermal overload protector (TOP) wired internally
Motor Insulation Class: F
Direction of rotation: Counterclockwise, see on the leads
Approvals: CCC, CE, UL
Working temperature: -40~65℃
Type | Voltage (VAC) | Frequency (Hz) | Airflow (m3/h) | Airflow (CFM) | Speed (r/min) | Power (W) | Current (A) | Noise LP:dB(A) |
SC355A2-AGT-22 | 230 | 50 | 2450 | 1502 | 1400 | 195 | 0.95 | 75 |
60 | 2850 | 1678 | 1600 | 290 | 1.4 | 76 | ||
SC355A2-ACT-22 | 115 | 60 | 2600 | 1530 | 1550 | 270 | 2.4 | 76 |
AC Centrifugal Fan Φ400-195
Material: Impeller is made of sheet aluminum
IP rating: IP54
Bearing: Ball bearing
Operation Mode: S1
Protection: Thermal overload protector (TOP) wired internally
Motor Insulation Class: F
Direction of rotation: Counterclockwise, see on the leads
Approvals: CCC, CE, UL
Working temperature: -40~65℃
Type | Voltage (VAC) | Frequency (Hz) | Airflow (m3/h) | Airflow (CFM) | Speed (r/min) | Power (W) | Current (A) | Noise LP:dB(A) |
SC400A2-AG5-00 | 230 | 50 | 3650 | 2150 | 1370 | 370 | 1.6 | 77 |
AC Centrifugal Fan Φ500-235
Material: Impeller is made of sheet aluminum
IP rating: IP44
Bearing: Ball bearing
Operation Mode: S1
Protection: Thermal overload protector (TOP) wired internally
Motor Insulation Class: F
Direction of rotation: Counterclockwise, see on the leads
Approvals: CCC, CE
Working temperature: -40~65℃
Type | Voltage (VAC) | Frequency (Hz) | Airflow (m3/h) | Airflow (CFM) | Speed (r/min) | Power (W) | Current (A) | Noise LP:dB(A) |
SC500B2-AL5-00 | 3~400 | 50 | 8500 | 5005 | 1420 | 1200 | 2.5 | 81 |
AC Centrifugal Fan Φ630-290
Material: Impeller is made of sheet aluminum
IP rating: IP44
Bearing: Ball bearing
Operation Mode: S1
Protection: Thermal overload protector (TOP) wired internally
Motor Insulation Class: F
Direction of rotation: Counterclockwise, see on the leads
Approvals: CCC, CE
Working temperature: -40~65℃
Type | Voltage (VAC) | Frequency (Hz) | Airflow (m3/h) | Airflow (CFM) | Speed (r/min) | Power (W) | Current (A) | Noise LP:dB(A) |
SC630B2-AL5-00 | 3~400 | 50 | 17000 | 1000 | 1320 | 2800 | 4.7 | 85 |