1000HP Skid-Mounted Drilling Rig
Our 1000 horsepower skid-mounted drilling rig is designed for high power and high efficiency oil drilling for shallow oil wellsno deeper than 13,120 ft (4000m).
The drill rig is driven by the following methods
1. DC/SCR driving type. Model ZJ40DAC/VFD driving type. Model
2. DC/SCR or AC/VFD drive rotary table and mechanical drive drawworks, mud pumps. Model
3. Complete chain mechanical driving type. Model
Features
1. Emergency drive device for the main AC or DC motor in case of drive failure. This can be used for automatic drilling or in case of emergency driving during drilling operation.
2. 138/142ft (42/43m) open face, H-type steel mast with three single DP triples.
3. Mast and substructure raised by drawworks together, or by hydraulic cylinders.
4. 6/7.5m height drilling floor.
5. Top drive system is available.
| Nominal drilling depth(114mm drill pipe) m | 1. 32- 4 |
| Max. hook load ton/ k N | 1. 230 / 225 0 |
| Max. number of line of travelling system | 1. 10 |
| Nominal dia. Of drilling line mm(in) | 1. 32 (1 1/ 4 ″) |
| ID. Of swivel stem mm(in) | 1. 75 (3) |
| Drawworks power rating kW( HP ) | 1. 735 ( 100 0) |
| Rotary opening mm(in) | 1. 520(20 1/2), 698.5(27 1/2) |
| Rated power for each mud pump kW( HP ) | 1. 960 (1 3) |
| Mast height m(ft.) | 1. 13 8 /14 2 ft(4 2 /43m) |
| Height of substructure floor m(ft.) | 1. 6(19.5),7.5(25) |
| Drilling floor clear height m(ft.) | 1. 4.8(15.6), 6.3(20.5) |
