GUIBAO 1098 High Performance Silicone Weatherproofing Sealant
weather seal, weatherproofing sealant, silicone sealant, adhesive, building sealant, architectural sealant, joint sealant
Basic Uses
GB1098 High Performance Silicone Weatherproofing Sealant is specially designed for
- Weather seal for the high-rise curtain walls and skyscrapers
- Weather seal for the large-sized metal and glass panel curtain walls, spider systems
- Weather seal of other construction joints with higher movement or with higher safety requirement
- One part , excellent weatherability,unaffected by sunlight, rain, snow and ozone
- Neutral cure – suitable for use on metals, coated glass, aluminium panels, terracotta panels, concrete materials, galvanized steel and many other substrates
- Excellent tensile strength and 100/-50 movement capability
- GUIBAO 1098 High Performance Silicone Weatherproofing Sealant
- Excellent resistance to temperature extremes, stable and flexible over the temperature from –50 ℃ to 150 ℃
- Excellent unprimed adhesion to a wide variety of construction materials and building components
- Easy of application-ready to use as supplied
- Good compatibility with other neutral silicone sealants
Colours
GUIBAO 1098 is available in black, gray, white and other customized colours.
Packaging
GUIBAO 1098 is available in 350ml disposable cartridges (net 300ml),24 pieces to a carton and sausages (net 590ml),20 pieces to a carton.
For more details, please download:
These values are not intended for preparing specifications.
| Test Method | Property | Unit | Standard(LM) | Result |
| GB/T 13477 (ISO 7390) | Slump | mm | ≤3 | 0 |
| GB/T 13477 (ISO 8394) | Extrusion rate | ml/min. | ≥80 | 696 |
| GB/T 13477 (ASTM D2377) | Tack free time | h | ≤3 | 1.5 |
| GB/T 13477 (ISO7389) | Extension recovery | % | ≥70 | 89 |
| GB/T 13477 (ISO 8339) | Modulus at | |||
| 23℃ | MPa | >0.4 or | 0.8 | |
| -20℃ | MPa | >0.6 | / | |
| GUIBAO 16776 (ASTM C 792) | Heat aging | |||
| Weight loss | % | ≤10 | 4.1 | |
| Chalking | Nil | Nil | ||
| Cracking | Nil | Nil | ||
| GB/T 13477 | Adhesion at fixed stretch | No failure | No failure | |
| GB/T 13477 | Adhesion after heat contract and cold extension | No failure | No failure | |
| GB/T 13477 | Adhesion after UV-water exposure | No failure | No failure |
*GB: Chinese National Standard
ASTM: American Society for Testing and Materials
ISO: International Standardization Organization
Complete technical information and literature, adhesion testing and compatibility testing and are available from GUIBAO.
Surface Preparation
Clean all joints removing all foreign matter and contaminants such as oil, grease dust, water, frost, old sealants, surface dirt, or glazing compounds and protective coatings.
Application Method
Install back-up materials or joint fillers, setting blocks, spacer shims, and tapes. Mask areas adjacent to joints to ensure neat sealant lines. Primer is generally not required for non-porous surfaces, but may be necessary for optimal seal performance of certain porous surfaces. So adhesion test is always recommended.
Apply GUIBAO 1098 in a continuous operation using dispensing guns. Before a skin forms, tool the sealant with light pressure to spread the sealant against the backing materials and joint surfaces. Remove masking tape as soon as the bead is tooled.
