HA424 EOC Slave
HA424 EOC slave provides two cable ports and four 100M full-duplex Ethernet ports. It enables simultaneous connection of multiple terminals including computer, digital TV set-top box, IP telephone, and more. Additionally, this data transmission system supports QoS settings. It can provide various types of data flow with a guarantee on related transmission priority. Therefore, it can cater for the needs of multiple users.
Features of the EOC Slave
1. This product adopts OFDM multi-carrier modulation and channel-adaptive technology. Therefore, it provides strong anti-jamming capability, effective against network noise.
2. The network device is used for communication at low frequencies of less than 65MHz. Its built-in efficient filter causes a little interference with CATV.
3. Provided with rich Ethernet functions, our communication device supports VLAN, IGMP Snooping, QoS, and so forth.
4. Support remote software upgrade.
5. Managed intensively by EOC master, the product supports both configurations and upgrades in batches.
6. Without being configured, it supplies a plug-and-play solution.
7. Support many restriction functions, e.g., optional internet access function, thus giving much convenience for operation and management.
| Item | Specification |
| System Bandwidth | Physical layer data rate 500Mbps MAC layer data rate 350Mbps |
| Modulation | 4096/1024/256/64/16/8-QAM, QPSK, BPSK, ROBO |
| MAC Layer Protocol | TDMA/CSMA |
| EOC Technology | HomePlug AV |
| Frequency | 7.5 ~ 65MHz |
| Protocol and Standard | IEEE 802.1Q IGMP v1, v2 IEEE 802.1P QoS |
| Network Management | Support WEB management. Support command-line administration. Support SNMP protocol management. |
| Data Interface | Four 10/100M adaptive Ethernet port Auto MDI/MDIX Compliance with IEEE 802.3 and IEEE802.3u standards |
| RF Interface | 2 RF ports (Metric thread F type) Output level: 110dBμV Insertion Loss: <1dB Impedance: 75 Ω |
| Light Indicator | ETH (4pcs LAN network interface LED) DATA (data interface LED) SYS (system LED) PWR (power LED) |
| Power Supply | DC 12V/1A |
| Power Consumption | 4W |
| Dimension | 180mm (L) × 105mm(W)× 35mm(H) / Length× Width × Height |
| Operating Temperature | -10 ℃ ~ 55℃ |
| Storage Temperature | -20 ℃ ~ 70℃ |
| Operating Humidity | 20% ~ 85% non-condensing |
| Storage Humidity | 10% ~ 90% non-condensing |
