MZF Magnetic Drive Pump (Single Stage Pump)
Properties
Size : DN25~DN200
Flow rate : 1~900m3/h
Head : ~200m
Temp. : No higher than 220°C
Pressure: 2.5MPa
Rotating speed : 1450/2900/min
Pressure rating: 1.6 MPa and 2.5MPa (figure of the E-type pump which adopts the center support is 4.0 Mpa)
Power : Maximum 315kW
Materials : Cast iron, cast steel, stainless steel alloys, titanium and titanium alloys
This MZF magnetic drive pump provided by DAMEI is a reliable single-stage single-suction cantilever magnetic drive pump. Of a laconic structure, this magnetic drive centrifugal pump enjoys highly reliable performance, lower general cost and running cost. Its high quality frees it from depot repair forever.
Structural Features of MZF Magnetic Drive Pump
1. This magnetically coupled pump is a reliable single-stage and single-suction pump.
2. The magnetic coupling and sliding bearings could be effectively cooled and lubricated by the circulating media within pump.
3. The internal circulation of media contains the high-pressure circulation and low-pressure circulation. The former is suitable for media easy to be evaporated and the later suitable for those other media.
4. Of a scientific design, this mag drive pump is free from leakage.
5. Heating jacket and cooling jacket could be adopted according to the specific working conditions.
| 102 | Pump casing | 410 | V-ring | 818 | Component for inside magnetic cylinder |
| 161 | Pump cover | 502 | Impeller ring | 922.1 | Impeller nut |
| 211 | Shaft | 525 | Protective casing | 922.2 | Spindle nut |
| 213 | Drive shaft | 529 | Sliding bearing sleeve | 922.3 | Spindle nut |
| 230 | Impeller | 543 | Sleeve | 932 | Detent ring |
| 321 | Rolling bearing | 545 | Component for sliding bearing | 940 | Key |
| 332 | Bearing bracket | 630 | Oil filling port | ||
| 360 | Bearing cap | 813 | Component for outside magnetic cylinder | ||
| 473 | Component for thrust disc | 817 | Component for distance sleeve |
Application of MZF Magnetic Drive Pump
This industrial centrifugal pump is suitable to convey corrosive, noxious, combustible, explosive or valuable media or media that easily get evaporated. It has been widely applied in the chemical, petrochemical, coal chemical, pharmaceutical, paper making and textile industrials, as well as water treatment plants and nuclear power plants.
