Fractional Co2 Laser, Kam-906V
Features
1. US- imported RF CO2 laser tube generator with an excellent performance
2. 7 different output patterns, diagonal length of 0.1mm to 20mm (adjustable)
3. Excellent treatment results, perfect skin recovery quickly after treatment
4. 10" color touch screen, normal fractional two moods
5. Portable, stylish design, easy to move and carry out daily maintenance
6. Smaller focal point, high penetration and powerful energy output
7. Excellent cost to performance ratio, designed for use in beauty salons and clinics
| Electrical Requirements | AC 110V± 10% 60Hz AC 220V± 10% 50Hz | Beam Delivery | 6 joint arm | ||
| Wavelength | 10600nm | Cooling | Air cooling | ||
| Aiming wavelength | 635nm | Output mode | Continuous, super pulse, fractional | ||
| Focal Spot Diameter | 0.2mm | Operating mode | Continuous, operation with, intermittent loading | ||
| Power of Aiming Beam | ≤ 5mw | Whether Preview or not | Yes | ||
| Pulse Interval | 1ms-5000ms, every stepping 1ms | Times of scanning | 1th-20 th, every stepping 1th | ||
| Pulse Width | 0.1ms-10ms, every stepping 0.1ms | ||||
| Scanning Mode | Free scan, sequence scan, maximum distance scan | ||||
| Output Power | 20W (30W , 40W optional) 1%-100%(adjustable), every stepping1% | ||||
| Output Pattern | Beeline, triangle, right square, rectangle, hexagon, rotundity, ellipse and so on | ||||
| Spots Interval | 0.1mm-2.6mm, every stepping 0.1mm | ||||
| Pattern Size | Diagonal length from 0.1mm to 20mm is adjustable at random | ||||
| Machine weight | 30 KG | Packing weight | 45 kg | ||
| Machine size | 65cm x 36cm x 31cm | ||||
Principle:
CO2 fractional laser systems shoot a laser beam of 10,600nm, which then splits into a number of microscopic beams, and produce a tiny dot or pixel like treatment zone within the selected area of skin while keeping other areas intact. The heat of the laser will only pass through the damaged area, allowing skin to heal much faster than if the entire area was treated. During the skin resurfacing, collagen fibers are produced, leading to the skin looking healthier and younger.
Application:
1. Remove acne, acne scars, other scars
2. Remove wrinkles from around the eyes, crows feet, wrinkles from dehydration
3. Reduce wrinkles in the face, forehead, joints and stretch marks
4. Remove freckles, nevus zygomaticus and other spots formed by hypochromic pathological changes
5. Tighten skin and lift skin on the face
6. Remove stretch marks and other deep scars
1800×1000mm Auto Feeding Large Format Camera Positioning CO2 Laser Cutter, CMA1810-FV-E Laser Cutting with auto feed system
lasercut-group.com
1600×1000mm Large Format Camera Positioning CO2 Laser Cutter, CMA1610-V-B Laser System
lasercut-group.com
