QS Servo Drive

Request a Quote

View All: http://solutionfiltration.com/1-3-qs-series-air-water-separator-filter.html

QS8 Series
QS8 series is the latest economic AC servo drive with more stable hardware, covering a power range from 200W to 4.3KW.

QS7 Series Standard AC Servo Drive
QS7 series standard AC servo drive is the third generation of servo drive developed by ADTECH. It optimized software algorithms, mature and robust hardware structure, covering a power range from 100W to 5.5KW.

QS2 Series Low Voltage Servo Drive
QS2 series low voltage servo drive is designed by ADTECH for the low voltage, low cost occasion. Based on years of experience in the field of general servo, we build a variety of algorithms in this small size drive. The parameters can be flexibly adjusted. Together with low-voltage servo motor, it is widely used in the 100W ~ 400W low-power applications.

Features
1) Smooth Command
With effective smoothing filtering of input pulse, the motor speed and acceleration speed is continuous and smooth. The service life of the machine is also effectively extended.
2) Damping Control
With the feedforward damping control, the vibration of the mechanical front end and the frame can be suppressed by a simple adjustment. At the same time, it is possible to set and select four frequencies for controlling the vibration.
3) High Speed Positioning
The speed response bandwidth is 500KHz. The acceleration time from 1 to 3000rpm without load is 15ms. It has good low-speed performance, at 10rpm, the speed error is less than 0.1% after setting.
4) Command Tracking and Suppression
With the new position algorithm, it can effectively restrain the position deviation, when the position command changes, and basically realize the zero position deviation.
5) Setting Time Significantly Shortened
With new algorithm, the positioning time can be greatly shortened.
6) Control Mode Switch
Position control, speed control, torque control are integrated together, and can be switched in motion.

Technical Parameters

Drive model (QS8 series)		QS8AA020M	QS8AA030M	QS8AA050M2	QS8AA075M2
Input power supply		Main power supply: AC220V -15%~ 10%		Control power supply: AC220V-15%~ 10% Main power supply: AC220V
Feedback		2500 line/5000 line incremental photoelectric rotary encoder / 17 bit absolute value encoder
Speed ratio		1:5000
Speed fluctuation ratio		<±0.03% (under rated load)
Pulse command input	Pulse type	Pulse direction, pulse pulse, A B 90 ° orthogonal pulse
	Pulse frequency	Differential drive: 500K, open collector: 200K
Analog command input		-10V~10V, input impedance: 10KΩ
Pulse output signal		Differential output of A, B, Z signals by encoder, output of Z signal by collector
Input signal		Servo enable, alarm clearance, position prohibition, forward limit, reverse limit, control mode
Output signal		Positioning completion, servo alarm, servo ready, brake output, zero output
Protection function		Overcurrent, overvoltage, undervoltage, overload, overheating, phase loss, over speed, encoder error, over-tolerance, module error, etc.
Monitoring function		Rotation speed, current position, current pulse frequency, position deviation, motor torque, motor current, analog input value, etc.
Communication function		With RS232/485, it can realize real-time communication with the PC, real-time parameter modification, and servo system running status monitoring.

Drive model (QS7 series)		QS7AA020M	QS7AA020M	QS7AA050M2	QS7AA075M2
Input power supply		Main power supply: AC220V -15% ~ 10%		Control power supply: AC220V -15% ~ 10% Main power supply: AC220V
Feedback		2500 line/5000 line incremental photoelectric rotary encoder
Speed ratio		1:5000
Speed fluctuation ratio		<±0.03% (under rated load)
Pulse command input	Pulse type	Pulse direction, pulse pulse, A B 90 ° orthogonal pulse
	Pulse frequency	Differential drive: 500K, open controller: 200K
Analog command input		-10V~10V, input impedance: 10KΩ
Pulse output signal		Differential output of A, B, Z signals by encoder, output of Z signal by collector
Input signal		Servo enable, alarm clearance, position prohibition, forward limit, reverse limit, control mode
Output signal		Positioning completion, servo alarm, servo ready, brake output, zero output
Protection function		Overcurrent, overvoltage, undervoltage, overload, overheating, phase loss, over speed, encoder error, over-tolerance, module error, etc.
Monitoring function		Rotation speed, current position, current pulse frequency, position deviation, motor torque, motor current, analog input value, etc.
Communication function		With RS232/485, it can realize real-time communication with the PC, real-time parameter modification, and servo system running status monitoring.

Input power supply		DC24V~80V
Feedback		1000 line/2500 line incremental photoelectric rotary encoder
Speed ratio		3.513888889
Speed fluctuation ratio		<±0.03%( under rated load)
Pulse command input	Pulse type	Pulse direction, pulse pulse, A B 90 ° orthogonal pulse(differential drive open collector)
	Pulse frequency	Differential drive: 500K, open controller: 200K
Analog command input		-10V~10V, input impedance: 10KΩ
Pulse output signal		Differential output of A, B, Z signals by encoder, output of Z signal by collector
Input signal		Servo enable, alarm clearance, position prohibition, forward limit, reverse limit, control mode
Output signal		Positioning completion, servo alarm, servo ready, zero output (Z phase)
Protection function		Alarm of overcurrent, overvoltage, undervoltage, overload, overheating, phase loss, encoder error, etc.
Monitoring function		Rotation speed, current position, current pulse frequency, position deviation, motor torque, motor current, analog input value, etc.
Communication function		With RS232/485, it can realize real-time communication with the PC, real-time parameter modification, and servo system running status monitoring.