INT7400 Indoor EOC Master
HiOSO INT7400 indoor EOC master provides bandwidth of 350Mbps, occupying low frequencies of less than 65MHz. As one of internet parts, it can be divided into HA4200, HA4200D and HA4202.
1. HA4200 contains 1 built-in EOC module.
2. HA4200D comprises 1 built-in EOC module and also supports 4 RF ports.
3. HA4202 EOC contains 2 built-in EOC modules. Each EOC module can support up to 253 EOC slaves. This device is suitable for buildings where there are a great number of internet users.
Features of the Indoor EOC Master
1. With strong anti-jamming capability, the indoor EOC master is effective against network noise. It adopts OFDM multi-carrier modulation and channel-adaptive technology.
2. This network device is compatible with HomePlug AV and IEEE 802.3 10/100/1000 Ethernet. It conforms to IEEE 802.3ah standard.
3. With frequency range from 7.5MHz to 65MHz, our product does not interfere with CATV signals. It offers long transmission distance.
4. Support different management methods such as SNMP, WEB, Command-Line Interface (CLI), etc.
5. Support remote upgrades and local management with serial port.
6. Support SNMPv3 protocol.
7. This network access equipment has abundant Ethernet functions, supporting VLAN, IGMP Snooping, QoS, and so on.
8. It shows strong adaptability to network, amplifier and distributor.
9. Support remote software upgrade.
10. Support integrated management for slaves.
11. Support AC220V power supply.
| Parameter | Specification |
| System Bandwidth | Physical layer data rate 500Mbps MAC layer data rate 320Mbps |
| Modulation | OFDM |
| MAC Protocol | TDMA and CSMA |
| EOC technology | HomePlug AV |
| Frequency | 7.5 ~ 65MHz |
| EOC module | 1/2/4 optional |
| Carrying Capability | 253 per EOC module |
| Protocol and Standard | IEEE HomePlug AV, IEEE802.3, IEEE802.3x, IEEE802.3uAutoMDI(X) |
| NMS | WEB, CLI, SNMP |
| Data Interface | Two 10/100/1000 Base-TX RJ45 ports Auto MDI/MDIX Comply with 802.3, IEEE802.3u. |
| RF Interface | 2 RF ports (Metric thread F type) Output level: 110dBμV Insertion Loss: <1dB Flatness in Band: ±0.5dB Return Loss: >16dB Suppression ratio of out band: 55dB Impedance: 75Ω Output level: 100~106dBμV |
| Light Indicator | PWR (power LED) EOC (management system LED) SYS (system LED) CAB (link LED) ETH1/2 (Ethernet port LED) |
| Distance | Not more than 1000m |
Note: The above-mentioned parameter is for single EOC master module. 2/4 modules parameters are the same.
Working Environment of the Indoor EOC Master| Parameter | Specification |
| Power | AC220V |
| Operating Temperature | -10 ~ 55℃ |
| Storage Temperature | -40 ~ 70 ℃ |
| Humidity | 5% ~ 90% non-condensing |
| Dimension | HA4200: 218mm (length) * 176mm(width) * 38mm(height) HA4200D: 218mm(length) * 176mm(width) * 38mm(height) HA4202: 218mm(length) * 176mm(width) * 38mm(height) |
| Types | Chipset | EOC module | RF ports | Power |
| INT7400 | 1 | 2 | AC220 | |
| INT7400 | 1 | 4 | AC220 | |
| INT7400 | 2 | 4 | AC220 |
