PTFE Heat Shrinkable Tube
Description
The Jdd -MTLS PTFE heat shrinkable tube combines the advantages of most common heat shrinkable tubes and the outstanding chemical properties of fluoropolymer. This particular variety of heat shrink tubing is made of 100% PTFE material, and is one of the best in the entire family of fluoropolymer heat shrinking tubes. The PTFE tubing is known for its high temperature and chemical resistance, with a low friction rating and low moisture absorption level. When the shrinkable tube is at its smallest size, it is perfect for high temperature environments.
Applications
The PTFE heat shrinkable tube is often used in military applications, industrial uses, biomedical industrial uses, chemical and analytical sciences, and the printing industry.
Material: PTFE
Shrink ratio: 1.7:1 or 3.5:1
Working temperature: -80℃~ 260℃
Shrinkage temperature: 320℃~ 400℃
Longitudinal shrinkage ≤5%
Flammability:VW-1
Voltage: 30kv/mm
Approval: RoHS
Tool: Heat-gun, Oven
DrawingUnit: mm
| 1.7:1Datasheet | |||||
| Part No. | As supplied | After recovery | Packing (L) | ||
| I.D. | Wall thickness | I.D. | Wall thickness | ||
| 0.7±0.2 | 0.15±0.05 | ≤0.40 | 0.25 ±0.05 | 200 m/roll | |
| 1.0±0.2 | 0.15±0.05 | ≤0.50 | 0.25 ±0.05 | 200 m/roll | |
| 1.5±0.2 | 0.20±0.05 | ≤0.90 | 0.25 ±0.05 | 200 m/roll | |
| 2.0±0.2 | 0.20±0.05 | ≤1.30 | 0.30 ±0.05 | 200 m/roll | |
| 2.5±0.2 | 0.20±0.05 | ≤1.50 | 0.30 ±0.05 | 200 m/roll | |
| 3.0±0.2 | 0.20±0.05 | ≤1.80 | 0.30 ±0.05 | 200 m/roll | |
| 3.5±0.2 | 0.20±0.05 | ≤2.0 | 0.30 ±0.05 | 200 m/roll | |
| 4.0±0.3 | 0.20±0.05 | ≤2.5 | 0.30 ±0.05 | 200 m/roll | |
| 4.5±0.3 | 0.20±0.05 | ≤2.8 | 0.30 ±0.05 | 200 m/roll | |
| 5.0±0.3 | 0.20±0.05 | ≤3.0 | 0.30 ±0.05 | 200 m/roll | |
| 6.0±0.3 | 0.25±0.05 | ≤3.8 | 0.38 ±0.05 | 100 m/roll | |
| 7.0±0.3 | 0.25±0.05 | ≤4.0 | 0.38 ±0.05 | 100 m/roll | |
| 8.0±0.3 | 0.25±0.05 | ≤4.8 | 0.38 ±0.05 | 100 m/roll | |
| 9.0±0.3 | 0.25±0.05 | 5.0 | 0.38 ±0.05 | 100 m/roll | |
| 10±0.3 | 0.25±0.05 | ≤6.0 | 0.38 ±0.05 | 100 m/roll | |
| 12±0.3 | 0.25±0.05 | ≤7.0 | 0.38 ±0.05 | 100 m/roll | |
| 4:1 Datasheet | |||||
| Part No. | As supplied | After recovery | Packing (L) | ||
| I.D. | Wall thickness | I.D. | Wall thickness | ||
| 2.0±0.25 | 0.06±0.02 | ≤0.50 | 0.20±0.05 | 100 m/roll | |
| 2.5±0.25 | 0.06±0.02 | ≤0.65 | 0.20±0.05 | 100 m/roll | |
| 3.0±0.25 | 0.06±0.02 | ≤0.75 | 0.20±0.05 | 100 m/roll | |
| 3.5±0.25 | 0.06±0.02 | ≤0.88 | 0.20±0.05 | 100 m/roll | |
| 4.0±0.25 | 0.06±0.02 | ≤1.00 | 0.20±0.05 | 100 m/roll | |
| 4.5±0.25 | 0.06±0.02 | ≤1.15 | 0.20±0.05 | 100 m/roll | |
| 5.0±0.25 | 0.06±0.02 | ≤1.25 | 0.20±0.05 | 100 m/roll | |
