5 Ton Wheel Loader
The 5 ton wheel loader is equipped with a series of buckets and accessories, which can meet your various requirements. It is perfect for material handling, waste disposal, municipal construction, recycle, lumber yard, quarrying, agricultural application and other places or occasions.
Features
1. Comfortable Cab
In accordance with the ROPS or FOPS industry standard, the impressive cab makes enough room for the operator's feet and legs, so as to offer him comfort and safety.
2. Matched Parts
These parts match well and produce better effect, namely, greater breakout force, shorter cycling time and lower fuel consumption.
3. Torque Parallel Leveraged Mechanism Design
The design is aimed at achieving the maximum breakout force and brilliant parallelly moving performance when the engine runs.
4. Engine Cover
The new designed cover has a better ventilation effect. It can be opened at a wider angle, which facilitates maintenance.
Parameters of Wheel Loader
Rated capacity of bucket (m3) | 2.7-3.5 |
Rated loading capacity (kg) | 5000 |
Working weight of loader (kg) | 16200 |
Dumping height(mm) | 3115-3380 |
Dumping angle | 45° |
Dumping reach(mm) | 1240 |
Wheel base(mm) | 3200 |
Wheel tread (mm) | 2250 |
Min. ground clearance (mm) | 430 |
Steering angle (°) | 35 |
Overall length (mm) | 8020 |
Max. overall height(mm) | 3310 |
Bucket width(mm) | 3070 |
Max. turning angle (to the ground) (°) | 45 |
Max. lifting time | 55 |
Hinge pin height | 275 |
Height of carrying location (mm) | 400 |
Max. traction force (kN) | 156 |
Turning radius of bucket in carrying location (mm) | 7760 |
Max. gradeability (°) | 28 |
Tipping load (kN) | ≥100 |
Max. breakout force (kN) | ≥170 |
Actuation time of working deveices(s) | a) Lifting with rated load: ≤6 b) Descending with empty load: ≤4 c) Bucket tilting forward: ≤2 |
Multitandem valve model | DF32.2 |
Set pressure(MPa) | 16 |
Bucket Capacity | 2.7-3.5m3 |
Rated Load | 5000kg |
Dumping Height | 3115-3380mm |
Dumping Reach | 1300mm |
Max. Traction Force | 156kn |
Max. Breakout Force | 185kn |
Gradeability | 28° |
Wheel Base | 3200mm |
Wheel Tread | 2250mm |
Rated Power | 160kw |
Overall Weight | 16500kg |
Tyres Type | 23.5-25 |
L×W×H | 8020×3070×3400 |
Model | 6CTA8.3-C215 |
Type | Water cooled, 4 stroke, 6 cylinder in line, direct injection, turbo charged |
Rated Power | 160kw |
Rated RPM | 2200rpm |
Displacement | 8.3L |
Cylinders | 6 |
Cylinder Bore Stroke | 135mm |
Compression Ratio | 16.5:1 |
Max. Torque | 908Nm |
Type | Single lever hydraulic pilot control |
Working Pressure | 16mpa |
Lifting Time (Max. Load) | 6.5s |
Descending Time (Empty Load) | 4s |
Dumping Time (Empty Load) | 1.2s |
Total Cycling Time | 11.7s |
Type | Full-hydraulic articulated steering |
Steering Angle | 36° |
Working Pressure | 12mpa |
Torque Converter | Type | Single phase, hydraulic converter |
Torque Ratio | ||
Cooling System | Circulated, water cooled | |
Traveling Speed | Forward(Km/H) | 8/15/23/38 |
Reverse(Km/H) | 8/15/23/38 | |
Brake System | Driving Brake | Gas-cap oil caliper disc brake |
Brake Pressure | 686-784kpa | |
Parking Brake | Air operated internal expansion brake |
Fuel | 300L | Engine Oil | 19L |
Hydraulic Oil | 300L | Lubrication Oil(Drive Axle) | 40L |
Lubrication Oil(Torque and Gearbox) | 40L |
Related Names
Tractor Loader | Heavy Construction Equipment | Payloader Machine