Cut to Length Line (Paper Roll to Sheet Cutter) Manufacturer

Cut to Length Line (Paper Roll to Sheet Cutter)

Request a Quote

View All: http://cn-printingmachines.com/5-2-paper-roll-to-sheet-cutter.html

The GM1100-1900 paper cutter is equipped with two cutting knives. The upper rolling knife is used for cutting and the lower rolling knife is for fixing, allowing the cutting machine to cut paper into specific lengths and widths in a highly efficient manner. This cutter is capable of automatic adjustment, and will cut in straight lines.

This machine is widely applicable and can cut paper weighing 60g/㎡-550g/㎡.

Technical parameter

Model	GM1100	GM1400	GM1700	GM1900
Max roll diameter	1500mm	1800mm	1800mm	1800mm
Max roll width	1100mm	1400mm	1700mm	1900mm
Cutting length	450-1450mm	450-1600mm	450-1600mm	450-1600mm
Cutting format	2 sheet	2 sheet	2 sheet	2 sheet
Max cutting speed	350 cut/min	350 cut/min	350 cut/min	350 cut/min
Max cutting meter speed	350m/min	350m/min	350m/min	350m/min
Max paper pilling height	1300mm	1500mm	1500mm	1500mm
Air request	0.8Mpa	0.8Mpa	0.8Mpa	0.8Mpa
Weight	11000kg	13000kg	15000kg	17000kg
Cutting precision	Cutting length≤1000mm: 0.5mm cutting length＞1000mm: 0.1%

Features

1. This cutter is equipped with a pre-press device. The pressure roller movement is a vertical manner, ensuring the precise positioning and preventing paper from folding during delivery.
2. Belt conveyors are efficient and stable, preventing the paper from tilting.
3. This cutter is equipped with three knives in three positions: top, bottom and back. There is a safety cover over the cutting sector, and the machine will not operate if this cover is open, thus ensuring operator safety.
4. The unwinding system is equipped with a pneumatic clutch with an extended service life and better precision when compared to a magnetic particle clutch.
5. This cutter is equipped with an electrostatic eliminator.
6. This cutter is equipped with an automatic label counting and label inserting device which inserts a piece of paper, then cuts it off when reaching the pre-determined quantities.
7. The unwinding system is equipped with shaftless drive and hydraulic drive to allow for an infeed, no matter how heavy the web roll is.
·Workers simply operate this equipment on the panels, and all processes will be automatically carried out by the cutter.
·This cutter is equipped with an automatic paper positioning device and paper collector.
·This cutter is controlled by a servo motor which ensures the stability and precision for operation.

Optional device:

Hydraulic EPC device in unwind part.
Vertical slitting to slit large width rolls into small width roll and slit waste edges away at two sides.