Solutions
| Item | Height | Length | Width |
| Size | 1900 | 2200 | 2900 |
| Item | Parameter |
| Rated capacity (J) | 40000 |
| Power supply (V/φ/HZ) | 380/ 3 PH /50HZ |
| Primary current (A) | 158 |
| Rated duty cycle (%) | 20 |
| Secondary voltage adjust level | 3 |
| Throat depth (mm) | 250 |
| Arm gap (mm) | 500 |
| Cylinder stroke (mm) | 150 |
| Welding speed (s/piece) | 8 |
| Max. working pressure (N/0.5MPa) | 76000 |
| Compressed air pressure (MPa) | ≥0.6 |
| Compressed air consumption (0.4MPa air pressure, stroke 30mm) (L/ welding spot) | 3.56 |
| Cooling water consumption (L/MIN) | 16 |
| Primary cable specification (MM2) | 3*35 2*16 |
| Max. Short Circuit Current (KA) | 200 |
Feature
1. The Heron car transmission shift fork spot and projection welding machine comes equipped with a 40000J capacitor discharge welding power supply.
2. A pressurized oil-air cylinder pressurization system is installed in the welding equipment.
3. The welding machine carefully controls the welding process and reduces the occurrence of spatter.
Background introduction
The welding equipment is specifically designed for the welding of car transmission shift forks. Traditional transmission shift fork designs feature an inblock cast technology or overall machining technology. Using our welding machine, the transmission shift fork can be fabricated through precision welding onto punched parts directly. This simplifies production and reduces costs.
