Thermally Conductive Silicone Sealant, ZS-NJ-D959W10G Manufacturer

Thermally Conductive Silicone Sealant, ZS-NJ-D959W10G

Request a Quote

Website: http://rtv-silicone.com/1-10-thermally-conductive-silicone-sealant.html

ZS-NJ-D959W10G RTV Silicone Adhesive Sealant

Description

The ZS-NJ-D959W10G RTV silicone adhesive sealant is a one-component dealcoholized sealant that cures at room temperature. This product features an excellent thermal conductivity and a service temperature range of -60℃～200℃. During the curing process, this product releases alcohol, thus it is ideal for non-corrosive applications for PC, copper, and other materials. It meets EU RoHS and REACH standards.

Typical applications

Fixing, heat conducting, insulating, shock-proofing and waterproof sealing electrical and electronic components

Technical specs

Uncured properties	Appearance	White, paste
	Tack free time (min)	≤15
	Cure through time (d)	3～7
Cured properties	Specific gravity (g/cm3)	2.70～2.95
	Hardness (Shore A)	65～80
	Tensile strength (MPa)	≥1.0
	Shear strength (MPa)	≥0.6
	Elongation (%)	≥20
	Temperature resistance (℃)	-60～200
	Volume resistivity (Ω·cm)	≥1.0×1012
	Dielectric Strength (kV/mm)	≥13
	Thermal Conductivity [W/(m·k)]	≥1.5

Note:

The performance data above are measured 7days after curing at 25℃ and 55% relative humidity.
The product cures tack free more slowly as the storage time increases.
Zhaoshun cannot assume responsibility for different results obtained under different conditions or caused by product improvement.

Related Manufacturies