Spot Repair Press
- Minimum Vulcanization Width: 250mm
- Maximum Vulcanization Width: 3200mm
EPNUO spot repair presses are designed for targeted maintenance and repair of rubber conveyor belts, including edge damage, localized surface wear, and longitudinal tears. These compact vulcanizers offer a cost-effective solution for extending belt life without full replacement.
- Available Sizes: 300×1000mm、300×1200mm、300×1500mm、300×2000mm
Designed for repairing small and minor surface damage on conveyor belts, this unit supports a standard repair area of 250 × 250 mm and is equipped with a 300 × 300 mm heating plate. Custom sizes are also available upon request, please contact our technical team for further assistance.
| Belt Type | Belt Width | Broken Size | Heating Plate Size | Power | Pressure (MPa) |
| Canvas, nylon, steel-cord belts | 650-1600mm | 250×250mm | 300×300mm | Depend on actual size | ＜0.5 ＜1.0 (beam type) |
| Belt Type | Belt Width | Broken Size | Heating Plate Size | Power | Pressure (MPa) |
| Canvas, nylon, steel-cord belts | 1800-2400mm | 250×250mm | 300×300mm | Depend on actual size | ＜0.5 ＜1.0 (beam type) |
Designed for repairing edge damage on conveyor belts, the EPN-6 supports a repair area of 250 × 900 mm, 250 × 1100 mm, 250 × 1400 mm, and other specifications as needed. Standard heating plate sizes include 300 × 1000 mm, 300 × 1200 mm, and 300 × 1500 mm. For custom dimensions or technical support, please consult our team directly.
| Belt Type | Belt Width | Broken Size | Heating Plate Size | Power | Pressure (MPa) |
| Canvas, nylon, steel-cord belts | 650-3200mm | 250×900mm 250×1400mm | 300×1000mm 300×1500mm | Depend on actual size | ＜0.5 ＜0.8 |
Engineered to repair a wide range of conveyor belt damages, including edge wear, localized abrasion, and longitudinal tears, this equipment offers a practical and efficient solution for on-site maintenance. Available in standard sizes: 300 × 1000 mm, 300 × 1200 mm, 300 × 1500 mm, 300 × 2000 mm, and 350 × 1000 mm, 350 × 1200 mm, 350 × 1500 mm, 350 × 2000 mm. For custom specifications, please contact our technical team.
| Belt Type | Belt Width | Broken Size | Plate Size | Power | Pressure (MPa) |
| Canvas, nylon, steel-cord belts | 650-1600mm | 250×900mm 250×1400mm | 300×1000mm 300×1500mm | Depend on actual size | ＜0.5 ＜1.0 (beam type) |
| Belt Type | Belt Width | Broken Size | Plate Size | Power | Pressure (MPa) |
| Canvas, nylon, steel-cord belts | 1800-2400mm | 250×900mm 250×1400mm | 300×1000mm 300×1500mm | Depend on actual size | ＜0.5 ＜1.0 (beam type) |
- Control Box
- Manual Hydraulic Pump
