Valve Hole Punch Press
Request a Quote
The valve hole punch press is a dual acting hydraulic punch specially designed for flattening and punching valve holes on the rim of medium and heavy tubeless wheels. The punch press includes three parts: the main machine, drive mechanism and electrical cabinet.
Process pictures- The valve hole punch press features an independent hydraulic gear and electrical cabinet.
- PLC control allows for adjustment, manual and semi-automatic work modes.
- Functions include over stroke protection, overpressure protection, emergency stop, and a filter clog alarm.
- This punch press features an adjustable working pressure, working speed, and stroke that meets actual customer requirements.
- The sliding block is guided by two guide rails. When the sliding block is subjected to an eccentric load, it will be borne by the guide rails to avoid direct action on the piston rod. This protects the piston rod from eccentric wear and strain, thus enhancing the sealing life.
| No. | Description | Data | |
| 1 | Model | YPCK-400 | YPCK-800 |
| 2 | Nominal force for flattening (main sliding block) | 400KN | 800KN |
| 3 | Max. Stroke of sliding block | 300mm | 400mm |
| 4 | Nominal force for hole punching | 250KN | 320KN |
| 5 | Max. Stroke of punching cylinder | 25mm | 25mm |
| 6 | Max. Distance between lower surface and work table | 670mm | 670mm |
| 7 | Sliding block size | 200×200mm | 300×200mm |
| 8 | Throat | 180mm | 200mm |
| 9 | Workbench size (LR × FR) | 380×180mm | 380×180mm |
| 10 | Ground height | 750mm | 750mm |
| 11 | Capacity | ＞ 6pcs/min | ＞ 4pcs/min |
| 12 | Motor power | 11.5undefinedkW | 18.5kW |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
