Metal Stud and Track Roll Forming Machine
Request a Quote
The roll forming machine is constructed for mass production of lightweight stud and track. The stud and track are structural framing components featuring lightweight and easy transportation, can be widely used in construction of hotels, airport terminal buildings, stations, playgrounds, etc.
Specifications| Raw Material | |
| Applicable Materials | GI (galvanized steel) GL (galvalume steel) PPGI (pre-painted galvanized steel) PPGL (pre-painted galvalume steel) AL (aluminum) CRC (cold rolled coil steel) HRC (hot rolled coil steel) |
| Material Thickness | 0.8-1.5mm (customizable) |
| Feeding Width | 100-400mm (customizable) |
| Effective Width | 50-150mm (customizable) |
| Machine Dimensions & PLC | |
| Profile Types | One machine supports multiple profile types via manual or automatic sleeve changing |
| Machine Size | Approx. 5×1.6×1.4m |
| Machine Weight | 3-5t |
| Machine Color | Customizable |
| Control System | Fully automatic control with PLC touch screen and frequency converter |
| Voltage | 380V, 50Hz, 3 Phase (upon customer's request) |
| Punching Device | |
| Punching Type | Press punching/hydraulic punching (optional) |
| Punching Die Configurations | Customizable according to profile drawings |
| Roll Forming Machine | |
| Main Shaft | Diameter: Ø60-70mm, Material: 45# steel (finish turning) |
| Roller Material | GR15 (annealing after forging, HRC 58-60, with chrome plated) |
| Forming Stations | 12-18 stations |
| Motor Power | 7.5-11kW |
| Forming Speed | 25-50m/min |
| Cutting Device | |
| Cutting Method | Automatic cutting (3.0-11kW, stationary cutting or non-stop cutting) |
| Cutting Blade Material | Cr12Mov (heat treatment, HRC 58-60) |
(Select from our standard profiles below, or send us your customized drawing)
ProcessDecoiling → Feeding & Guiding→ Roll Forming → Automatic Cutting-To-Length → Finished Product Collection
Configurations| No. | Equipment | Quantity |
| 1 | 5T Manual Uncoiler | 1 Set |
| 2 | Punching Device | 1 Set |
| 3 | Roll Forming Machine | 1 Set |
| 4 | Cutting Device | 1 Set |
| 5 | Hydraulic Power Unit | 1 Set |
| 6 | Control System (including Cabinet) | 1 Set |
| 7 | Run-Out Table | 1 Set |
- PLC control system ensures safe and smooth production;
- Machine structure is welded steel plates, guaranteeing high durability without deformation;
- Roll forming stations are made of high strength cast iron, providing long service life;