CNC V-Grooving Machine, HRK-Series Manufacturer

CNC V-Grooving Machine, HRK-Series

Request a Quote

Website: http://cnc-lasercutting.com/7-2-vertical-cnc-v-grooving-machine.html

Key Parameters
1. CNC controller: HUST-Taiwan
2. High-precise linear guide rail: HIWIN-Taiwan
3. Coupling: IGUS-Germany
4. Safety standards: CE ISO SGS

Technical Specifications:

Technical sheets
Max. width of steel sheet to be notched	1250mm	1250mm
Max. length of steel sheet to be notched	4000mm	3200mm
Max. thickness of steel sheet to be notched	6mm(plate flatness< 3mm) 6mm(flatness of steel sheet< 3mm)	6mm(plate flatness< 3mm) 6mm(flatness of steel sheet< 3mm)
Min. thickness of steel sheet to be notched	0.2mm	0.2mm
Max. distance of the beam movement (backward and forward)	1220mm	1220mm
Min. distance of V-groove edge	15mm	15mm
Max. distance of tool carrier movement (upward and downward) (in the direction of axle Z)	50mm	50mm
Resolution of tool carrier movement (upward and downward) (in the direction of axle X)	4300mm	4300mm
Cutting speed	15m-60m/min	15m-60m/min
Min. setting unit of axle Y	0.001mmmm	0.001mmmm
Positioning precision of axle Y	±0.02mm	±0.02mm
Min. setting unit of axle Z	0.001mm	0.001mm
Positioning precision of axle Z	±0.02mm	±0.02mm
Pressure range of gas circuit	0.4-0.6mpa	0.4-0.6mpa
Gross weight	9500kg	8000kg
Dimension	570022002300(mm)	50022002300(mm)

Product Details:

Features:

Compact Structure
HRK series CNC metal grooving machine features compact structure, reliable performance, easy operation and no deformation forever.
The structure consists of three sets of servo motor drive system, pneumatic clamping system and main steel frame.
Y-axis System
The Y-axis system of the machine is composed of ECMA-F20830 main motor, AC servo motor, planetary reducer timing belt and timing wheel, high-precision gear rack, linear guide rail and more.
The function of servo motor is to drive the cutter seat through planetary reducer to make rectilinear motion on the linear guide rail.
X-axis System
The X-axis system is composed of E21320 servo motor, timing belt, timing wheel, ball screw, linear guide rail, backgauge rack, clamping tool and more. The motor drives ball screw and backgauge rack to make rectilinear motion on the guide rail, and provide the accurate positioning for the backgauge mechanism.
Z-axis System
The Z-axis system is composed of C20604 servo motor, timing belt, timing wheel, ball screw, cutter holder and so on. Its function is to drive the ball screw and cutter seat make rectilinear motion through timing belt and timing wheel, and provide precise positioning for the tool holder.
Pneumatic System
HRK series CNC metal grooving machine features compact structure, reliable performance, easy operation and no deformation forever.
The structure consists of three sets of servo motor drive system, pneumatic clamping system and main steel frame.
Electrical Control System
The electrical control system is composed of PLC, actuator, touch screen, electric control element, electrical cabinet, etc. The electrical cabinet is installed in the side wall of the machine, which has convenient maintenance and high protection performance. Any work can be realized by controlling the touch screen.

Safety Identifiers:

Safety standards (2006/42/EC)
Power will be cut off when door opens
Foot switch (safety grade: 4)
Rear metal safeguard, CE standard
Safety relay monitors foot switch, safety protection

CNC Controller:

Low maintenance cost
Shorten training time
Avoid collision
Responsive time for acceleration/deceleration: 0.5US
High-speed positioning of main shaft
Retract function
Intelligent fault alarm and troubleshooting function
PLC interrupt function with the fixed scan time of 10ms
Open-loop control with feedback function
The servo motor torque can be read and displayed
The acceleration and deceleration control curve is superior to other numerical control
DC power input module
SSR external input signal plate
Easy wiring and low wiring cost

Standard Configurations:

HRK series grooving machine features
compact structure, reliable performance, frame structure, and non-deformation.
Taiwan HUST controller
Tool carrier can hold 3 tools at the same time. The maximum cutting depth is 1mm, which is 5 times of the efficiency of traditional equipment, and the return speed is also 5 times faster.
Pneumatic Feeding clamp
Pneumatic material clamping device
X, Y and Z axis all are equipped with Japan Panasonic servo motors.
Taiwan YYC gear-rack drive
Schneider Electrics
Taiwan AIRTAC air valve
Taiwan AIRTAC cylinder
Front photoelectric safety protection

Sample Display:

Related Manufacturies