Flame Cutting Machine
Our flame cutting machine is equipped with high precision AC motor, helical gear reducer and gear rack transmission system to achieve better reliability and precision. Cutting flames can be positioned by the high precision lead screw and the linear guide of roll so that the cutting flames can be in the same vertical line to ensure high cutting precision.
Technical Parameters
| Track gauge | 4000mm | 5000mm | Roughness of surface | Ra12.5 | ||
| Cutting width | 3200mm | 4200mm | Repeatability precision | ±0.5 | ||
| Min. cutting width | Numerical control | 230mm | 230mm | Main pipe line | Oxygen | P=1MPa |
| Ethyne | P=0.1MPa | |||||
| Straight | 80mm | 80mm | ||||
| Voltage | AC220V±10% | |||||
| Cutting thickness | 6-100mm | 6-100mm | ||||
| Cutting speed | 0.05-1m/min | 0.05-1m/min | Frequency | 50Hz | ||
| Max. return speed | 4000mm /min | 4000mm /min | Total power | 1.5KW | ||
| Cutting precision | ±0.5mm/1000mm | |||||
The beam is wholly bended and has been through temper aging treatment to prevent deformation. High precision servo motor from Panasonic or Fuji company is installed to improve precision. Imported AC frequency inverter can adjust the cutting speed conveniently. The air pressure control box can conveniently control the air pressure. All imported adjusting valves and air pipes can ensure that our cutting machine can work normally for a long time. And air bus-bar can also be provided if it is necessary.
