Steel Spiral Hose
Steel braided hose can be referred to by construction style. One-wire braided hose is built to SAE100R1AT-EN835 1SN standards, whereas two-wire braided hose meets SAE100 R2AT-EN853 2SN specifications.
The high-pressure steel hose features an inner tube constructed of oil-resistant rubber compounds with a smooth inner wall surface causing little drag to the media being conveyed. Outer reinforcement features 4-wire spiral construction, providing added strength and pressure resistance. The sleek beauty of outmost rubber cover is further complemented by a wear-resistant surface.
Applications
Steel spiral hose is best recommended for use in oil and gas well cementing, repair, oil and gas exploration work, on small drilling rigs, and to convey slurry, coal, and lukewarm water.
Recommended
Inner Tube: Oil Resistant Synthetic Rubber
Reinforcement: 4-wire Spiral Construction
Outmost Coating: Synthetic Rubber Resistant to Oil and Weathering
Temperature Range: -40°C~ 121°C
Hose Fitting: xxxx2-xx-xx series
Part No. | Nominal Internal Diameter DN | Hose Size | Hose Internal Diameter I.D. | Hose Outside Diameter O.D. | Minimum Burst Pressure | Maximum Working Pressure | MinimumBendRadius | Hose Ferrule | |
mm | DASH | in | mm | mm | MPa | MPa | mm | ||
R1206 | 10 | -06 | 3/8 | 9.5 | 20.3 | 110.3 | 27.6 | 127 | 400-06 |
R1208 | 12 | -08 | 1/2 | 12.7 | 23.8 | 110.3 | 27.6 | 178 | 400-08 |
R1210 | 16 | -10 | 5/8 | 15.9 | 27.4 | 110.3 | 27.6 | 203 | 400-10 |
R1212 | 20 | -12 | 3/4 | 19.0 | 30.7 | 110.3 | 27.6 | 241 | 400-12 |
R1216 | 25 | -16 | 1 | 25.4 | 38.0 | 110.3 | 27.6 | 305 | 400-16 |
R1220 | 32 | -20 | 1.1/4 | 31.8 | 47.0 | 82.7 | 20.7 | 419 | 01400-20 |
R1224 | 40 | • 24 | 1.1/2 | 38.1 | 53.5 | 69.0 | 17.2 | 508 | 01400-24 |
R1232 | 50 | -32 | 2 | 50.8 | 66.7 | 69.0 | 17.2 | 635 | 401-32 |
Inner Liner (Tube): Oil Resistant Synthetic Rubber
Reinforcement: 4-Wire Spiral Construction
Outer Coating: Oil and Weathering Resistant Synthetic Rubber
Temperature Range: -40° C ~ 100° C
Hose Fitting: xxxx2-xx-xx series
Part No. | Nominal Internal Diameter DN | Hose Size | Internal Diameter I.D. | Hose Outside Diameter O.D. | Minimum Burst Pressure | Maximum Working Pressure | Minimum BendRadius | Hose Ferrule | |
mm | DASH | in | mm | mm | MPa | MPa | mm | ||
4SP04 | 6 | -04 | 1/4 | 6.4 | 17.9 | 180 | 4 5.0 | 150 | 400-04 |
4SP06 | 10 | -06 | 3/8 | 9.5 | 21.4 | 178 | 44.5 | 180 | 400-06 |
4SP08 | 12 | -08 | 1/2 | 12.7 | 24.6 | 166 | 41.5 | 230 | 400-08 |
4SP10 | 16 | -10 | 5/8 | 15.9 | 28.2 | 140 | 350 | 250 | 400-10 |
4SP12 | 20 | -12 | 3/4 | 19.0 | 32.2 | 140 | 350 | 300 | 400-12 |
4SP16 | 25 | -16 | 1 | 25.4 | 39.7 | 112 | 280 | 340 | 400-16 |
4SP20 | 32 | -20 | 1.1/4 | 31.8 | 50.8 | 84 | 210 | 460 | 400-20 |
4SP24 | 40 | -24 | 1.1/2 | 38.1 | 57.2 | 74 | 18.5 | 560 | 400-24 |
4SP32 | 50 | -32 | 2 | 50.8 | 69.8 | 66 | 16.5 | 660 | 400-32 |
Inner Liner: Oil Resistant Synthetic Power
Reinforcement: 4-Wire Spiral Construction
Outer Coating: Oil and Weathering Resistant Synthetic Rubber
Temperature Range: -40°C~ 100°C
Hose Fitting: xxxx2-xx-xx series
Part No. | Nominal Internal Diameter DN | Hose Size | Hose Internal Diameter I.D. | Hose Outside Diameter O.D. | Minimum Burst Pressure | Maximum Working Pressure | MinimumBendRadius | Ferrule | |
mm | DASH | in | mm | mm | MPa | MPa | mm | ||
4SH12 | 19 | -12 | 3/4 | 19.0 | 32.2 | 168 | 42 | 280 | 400-12 |
4SH16 | 25 | -16 | 1 | 25.4 | 38.7 | 152 | 38 | 340 | 400-16 |
4SH20 | 32 | -20 | 1.1/4 | 31.8 | 45.5 | 130 | 32.5 | 460 | 401-20 |
4SH24 | 40 | -24 | 1.1/2 | 38.1 | 53.5 | 116 | 29 | 560 | 401-24 |
4SH32 | 50 | -32 | 2 | 50.8 | 68.1 | 100 | 25 | 700 | 401-32 |
Inner Liner: Oil Resistant Synthetic Rubber
Reinforcement: Multi-Wire Spiral Construction
Outmost Coating: Oil and Weathering Resistant Synthetic Rubber
Temperature Range: -40°C~ 121°C
Hose Fitting: xxxx3-xx-xx series
Part No. | Nominal Internal Diameter DN | Hose Size | Hose Internal Diameter I.D. | Hose Outside Diameter O.D. | Minimum Burst Pressure | Maximum Working Pressure | MinimumBendRadius | Ferrule | |
mm | DASH | in | mm | mm | MPa | MPa | mm | ||
R1312 | 20 | -12 | 3/4 | 19.0 | 32.1 | 137.9 | 34.5 | 241 | 621-12 |
R1316 | 25 | -16 | 1 | 25.4 | 38.7 | 137.9 | 34.5 | 305 | 621-16 |
R1320 | 32 | -20 | 1.1/4 | 31.8 | 49.8 | 137.9 | 34.5 | 419 | 621-20 |
R1324 | 40 | -24 | 1.1/2 | 38.1 | 57.3 | 137.9 | 34.5 | 508 | 621-24 |
R1332 | 50 | -32 | 2 | 50.8 | 71.8 | 137.9 | 34.5 | 635 | 621-32 |
Inner Liner: Oil Resistant Synthetic Rubber
Reinforcement: Multi-Wire Spiral Construction
Outmost Coating: Oil and Weathering Resistant Synthetic Rubber
Temperature Range: -40°C~ 121°C
Hose Fitting: xxxx3-xx-xx series
Part No. | Nominal Internal Diameter DN | Hose Size | Hose Internal Diameter I.D. | Hose Outside Diameter O.D. | Minimum Burst Pressure | Maximum Working Pressure | MinimumBendRadius | Ferrule | |
mm | DASH | in | mm | mm | MPa | MPa | mm | ||
R1506 | 10 | -06 | 3/8 | 9.5 | 20.6 | 168 | 42 | 130 | 621-06(R15) |
R1508 | 12 | -08 | 1/2 | 12.7 | 23.8 | 168 | 42 | 180 | 621-08(R15) |
R1512 | 20 | -12 | 3/4 | 19.0 | 31.6 | 168 | 42 | 280 | 621-12(R15) |
R1516 | 25 | -16 | 1 | 25.4 | 38.6 | 168 | 42 | 300 | 621-16(R15) |
R1520 | 32 | -20 | 1.1/4 | 31.8 | 49.6 | 168 | 42 | 400 | 621-20(R15) |
R1524 | 40 | -24 | 1.1/2 | 38.1 | 56.5 | 168 | 42 | 500 | 621-24(R15) |