CZ6280C Series Lathe
Request a Quote
CZ6280C Series
Technical parameter
| Model | |||
| Capacity | |||
| Max. swing over bed | 800mm | 1000mm | 1200mm |
| Max. swing over cross slide | 485mm | 685mm | 685mm |
| Center distance | 2m, 3m, 4m, 5m, 6m, 8m, 10m, 12m | ||
| Max. swing over gap | 1000mm | 1100mm | 1200mm |
| Valid length of gap | 300mm | ||
| Bed width | 550mm | ||
| Headstock | |||
| Spindle bore diameter | 105mm | ||
| Spindle nose | C-11 OR D-11 | ||
| Spindle tapered hole | MT#100 | ||
| Spindle speeds (step) | 14-750rpm(18 steps) | ||
| Gearbox threads and feeds | |||
| Threads range (kinds) | 1-240mm (54 kinds) | ||
| Threads range (kinds) | 1-28 inch (37 kinds) | ||
| Moudle threads range (kinds) | 0.5-60 DP (45 kinds) | ||
| Pitch thread range (kinds) | 30-1 TPI (27 kinds) | ||
| Longitudinal feed range (kinds) | .05-1.42mm/r (72 kinds) | ||
| Transverse feed range (kinds) | .015-0.48mm/r(72 kinds) | ||
| Rapid feed: Longitudinal/Transverse | 6/2m/min | ||
| Leadscrew size: Diameter/Pitch | T48mm/12mm | ||
| Carriage | |||
| Cross slide travel | 400mm | ||
| Tool rest travel | 230mm | ||
| Size of tool shank | 32*32mm | ||
| Tailstock | |||
| Sleeve diameter | 100mm or 120mm | ||
| Sleeve taper | Morse #5 or #6 | ||
| Spindle travel | 205mm | ||
| Motor | |||
| Main driving motor | 11KW | ||
| Cooling pump motor | 0.09KW | ||
| Rapid feed motor | 0.12KW or 0.18KW | ||
| Net weight and dimension (L*W*H) | |||
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
