E309LT0-1/4 Stainless Steel Flux Cored Wire
Request a Quote
The E309LT0-1/4 stainless steel flux cored wire adopts high purity 304L steel. This low alloy steel welding wire is highly recommended for flat and horizontal position welding, and our low carbon steel flux cored wire is characterized by amazing weldability, flawless appearance, negligible spatter and impressive efficiency.
Moreover, this stainless steel flux cored wire is applicable for welding of same grade stainless steel, as well as welding of mild steel or low alloy steel at different grades. Our gas shielded wire is also designed for backing weld applied to composite layer of clad steel plate, mild steel or low alloy steel.
Standards
GB/T 17853-1999 E309LT0-1
AWS A5.22 E309LT0-1
| C | Mn | Si | P | S | Cr | Ni | Mo | |
| Standard | ≤0.04 | 0.5-2.5 | ≤1.0 | ≤0.04 | ≤0.03 | 22.0-25.0 | 12.0-14.0 | ≤0.05 |
| Typical | 0.03 | 1.35 | 0.50 | 0.020 | 0.012 | 23.5 | 13.2 | 0.03 |
| Rm (MPa) | A5 (%) | |
| Standard | ≥520 | ≥25 |
| Typical | 580 | 42 |
| Wire diameter (mm) | Current (A) | Voltage (V) | Gas (l/min) |
| Φ1.2 | 120-260 | 18-28 | 15-25 |
| Φ1.6 | 180-320 | 24-32 | 15-25 |
Packaging
15kg plastic spool in vacuum sealed foil bag
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
