From your iPhone or any other Android phones, you are able to turn on or off your home GSM alarm remotely from outside your house. Simply download the security application to your phone, and run the app with just one click.

Universal Usability
Model G10 uses a GSM module which operates on 4 frequencies including 850Hz, 900Hz, 1800Hz, and 1900Hz, and will work in the most countries possible.

Automatic Phone Call or Text Message Alarm
Users can put 3 groups of text messages and mobile phone numbers into the alarm module beforehand. When the alarm is triggered, it will automatically send SMS messages or make phone calls to the designated mobiles. In either way, the premises’ owner would be notified of the alarm.

GSM Alarm System Arming/Disarming Alert Tones
A remote control is available to either activate or disarm your GSM alarm system in the zones to be monitored. Upon arming or disarming, the external siren would go off instead of the alarm module making a faint humming sound. This feature solves the problems of being unable to hear the alert tone played by the alarm module when the system is activated or disarmed while users are leaving home. Of course, the siren can be shut off when not in use.

Compatible with Both Wired and Wireless Movement Sensors
Most GSM alarm models are configured with 12 wireless detection zones, but model G50b comes with 24 such zones. There are 2 wired detection zones on each alarm model. Emergency call section and fire hazard detection section are also available, which stay turned on for 24 hours that eliminates the need to manually activate or disarm these two functions.

Intercom Functions
When you receive an alarm call from your wireless alarm system or take the initiative to dial the mobile phone number which hooks up to the security alarm, you can talk to whoever in your monitored premises through the intercom even when you are miles away from the site.

Voice Guidance
The voice guidance allows users to easily install and use the GSM alarm system.

Customizable Alarm Messages
Users can freely change the names of No.1-10 detection zones so that you can easily identify them.

External Alternating Current Detection
In the event that the external alternating current power supply is cut off or returns to normal use, the detection function is available to notify users in he form of text messages or phone calls. If for any reason the external power supply goes out, the intelligent home alarm unit would automatically switch to the backup battery. Please note that the alarm system can be provided with the rechargeable lithium-ion battery.

Centralized Alarm Connectivity Management
The alarm receiving center is where all the reported alarms are managed in an intelligent manner. Via certain alarm receiving software, the center would display alarm-related information such as the time, location, and the type of alarms. With the same software, users can perform remote control to either activate or disarm the alarm system.

Intelligent Heating System (Optional)
When the monitored premises’ temperature drops below -20℃ , the heating system would be activated automatically. This heater is still functional even when the ambient temperature is at -30℃.

Armed Stay Setting
You can turn your wireless alarm system to the Armed Stay status where only the perimeter sensors or detectors are on while the interior zones are disarmed so that you can walk around the home without triggering the alarm.

Arm/Disarm at a Pre-Set Time
Users can set the time of arming and disarming beforehand.

Armed Stay at a Pre-Set Time
Preset the time that would allow your GSM-based alarm unit to enter the state of Armed Stay at a certain every day.