Pressure Sensor
Request a Quote
Diffused silicon pressure sensor is often used in industries with high demands on automation, including heat supply, refrigeration, chemical engineering, coal mining, petroleum, food processing, water supply, etc. Because of its intrinsic characteristics, this collection of pressure transmitter cannot be used for high or low temperature mediums.
Main Technical Information of the Pressure SensorMeasuring range | -100KPa ~ 60MPa |
Accuracy level | Class 0.1, Class 0.2, Class 0.5 |
Ambient temperature | -40 ~ 70 ℃ |
Medium temperature | -40 ~ 125 ℃ |
Long term stability | Better than 0.1% F·S / year |
Working voltage | 12.5 ~ 36VDC -AC220v |
Output signal | 4-20mA (two wire system) 0/1-5VDC (three wire system) |
Span shift | 1/10 of calibrated span |
Vibration influence | 0.01%F.S (200Hz/g, any axis) |
Protection grade | IP65 |
Explosion protection technique | Exia Ⅱ CT4, intrinsically safe |
Material | Housing: molded cast aluminum Diaphragm: 96% alumina ceramics Process connector: 316L stainless steel or flange connector, flat diaphragm is available |
Seal ring | NBR, silicon rubber, fluororubber |
Accuracy class | ±0.25% intrinsic error |
Non-linear error | ≤±0.3%FS |
Hysteresis error | ≤±0.3%FS |
Output characteristics | ① 4-20mA output: 0-600Ω load resistance ② 4-20mA two wire system output: standard DC24V power supply |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos