Infant Incubator
The infant incubator from Medcare, isolette, neonatal incubator or baby incubator as it is also known, is designed for the specific needs of infant nurseries and neonatal intensive-care unit (NICU), providing the safest and most stable environment possible for the critical newborn infants. It incorporates state-of-the-art technology, innovative design, and exceptional thermal performance to facilitate the outcomes of your newborn patients.
Features of the Infant Incubator
1. Microprocessor based servo controlled temperature system;
2. Air temperature, skin temperature, humidity, timer and heating power are displayed by LED separately;
3. Alarms functions for power failure, over temperature, temperature deviation, temperature sensor failure and fan failure;
4. Silence/reset button for alarms;
5. Integral timer for therapy time recording;
6. Humidity can be adjusted continuously;
7. >37℃ temperature setting;
8. A keypad lock on the infant incubator prevents change of setting caused by your carelessness;
9. Trough that can be pulled and pushed is designed for convenient adding of water;
10. Low noise fan with high longevity;
11. Through the front control panel, temperature deviation and over temperature can be amended directly;
12. The hospital incubator is designed with a second thermal cut-off function for more safety;
13. A protection function for skin temperature sensor failure can avoid over temperature;
14. The infant bed inclination angle is adjustable;
15. It comes with six operating windows, and the operating windows at two sides can be swiveled
16. Heater will be electrically cut-out if air temperature inside the incubator is more than 40℃
17. Big storage cabinet
Standard Configuration
Main body (including the transparent hood, control system, infant bed, water trough), skin temperature sensor, IV pole, mattress, cabinet, castors
Optional parts
Phototherapy unit: Providing phototherapy to infants from up and down sides
RS232 (485) connector;
Tray/pole
| Power supply | AC 110/220V 60/50Hz | |
| Power input | ≤420VA | |
| Operating conditions | Environment temperature | 20℃ ~30℃ |
| Environment relative humidity | 30%~75%RH | |
| Environment air velocity of flow | <0.3m/s | |
| Air temperature control range | 25℃ ~38℃ | |
| Skin temperature control range | 32℃ ~38.5℃ | |
| Skin temperature sensor accuracy | /-0.3℃ | |
| Temperature fluctuation | 0.5℃ | |
| Uniformity of mattress temperature | ≤0.8℃ | |
| Warm-up time | ≤45min | |
| Internal noise level | ≤55dB | |
| Humidity display range | 10%-95%RH | |
| Humidity accuracy | ≤10%RH | |
| Infant bed tilt angle | 10º | |
| Mattress size | 67cm (L)×54cm(W) | |
| Trough capacity | 1200ml | |
| Air filter | 0.5um | |
Transport and Storage
Environment Temp:-10℃-- 70℃
Environment Relative Humidity: ≤80% RH
Atmospheric Pressure: 500~1060Hpa
