Angle Roll, W24S-45
Want an efficient, precise and material saving solution for bending of flat steels, angle steels, U and H steels, round steel bars, round steel tubes, square steel tubes and many other sections? As a specialized section bender manufacturer, Juli offer you the optimal solutions. Our W24S-45 angle roll is what we supply here for that application. This section bending machine comes with high bending efficiency, accuracy and notable economy of materials. It is ideal for profile bending in oil, chemical, power, shipbuilding, automobile, valve and machine manufacturing industries.
Features of the Angle Roll
1. Two lower rolls rotate in an arc around a fixed rotation center. Each of them can be used to pre-bend the section.
2. Tooling can be made to customer's section specifications. They experience tempering and hardening treatment to ensure high surface hardness and wear resistance.
3. All three rollers are driven individually. They can carry out crosswise and counter crosswise rotation.
4. Guide rollers with 3-Axes (for forward-backward, up-down and left-right movements) are driven by hydraulic cylinders, providing great convenience to control section bending accuracy.
5. The 3-roll profile bending machine is equipped with stand-alone operating panel and hydraulic power pack, ensuring small vibration and low noise during bending process.
6. International famous brand hydraulic block is used for high quality and reliability.
7. The hydraulic bender employs wideband motor, ensuring high insulation grade and long service life.
| Model | W24S-45 | ||
| Max. bending modulus of section (cm3) | 45 | ||
| Bending speed (m/min) | 5.5 | ||
| Yield limit of material ( MPa ) | 245 | ||
| Inward bending of angle steel | Maximum cross section (mm) | 100×10 | |
| Minimum bending diameter (mm) | 1500 | ||
| Minimum cross section (mm) | 36×5 | ||
| Minimum bending diameter (mm) | 600 | ||
| Outward bending of angle steel | Maximum cross section (mm) | 100×10 | |
| Minimum bending diameter (mm) | 1300 | ||
| Minimum cross section (mm) | 36×5 | ||
| Minimum bending diameter (mm) | 600 | ||
| Outward bending of channel steel | Channel steel model | 20 | |
| Minimum bending diameter (mm) | 1000 | ||
| Inward bending of channel steel | Channel steel model | 20 | |
| Minimum bending radius (mm) | 1150 | ||
| Plane bending of flat steel | Maximum cross section (mm) | 200×30 | |
| Minimum bending diameter (mm) | 900 | ||
| Vertical bending of flat steel | Maximum cross section (mm) | 100×25 | |
| Minimum bending diameter (mm) | 1000 | ||
| Bending of round pipe | Maximum cross section (mm) | 89×8 | |
| Minimum bending diameter (mm) | 900 | ||
| Bending of round bar | Maximum cross section (mm) | 75 | |
| Minimum bending diameter (mm) | 800 | ||
| Bending of square pipe | Maximum cross section (mm) | 80×6 | |
| Minimum bending diameter (mm) | 1200 | ||
Related Names
Regular and Irregular Profile Bending Machine
