Shaft Seals
Request a Quote
Shaft seals are dynamic seals used to seal passages between machine components in relative motion. A shaft seal is used in combination with the metal reinforced high pressure seal, though it also can function as a standalone unit for general sealing purposes. Made primarily of polyurethane, this grooved seal is easy to install and available in 18 models.
Shaft Seal Installation Drawing
Related Specs
| No. | Type | Groove dimension | Sealing ring | Order No. | ||
| D H9 | d f8 | L | ||||
| 1 | Y160×6.65 | 173.6 | 160 | 11.5 | 10.5 | |
| 2 | Y330×6.65 | 344 | 330 | 11.5 | 10.5 | |
| 3 | Y351×6.8 | 364.6 | 351 | 11.5 | 10.5 | |
| 4 | Y376.4×6.8 | 390 | 376.4 | 11.5 | 10.5 | |
| 5 | Y391.4×6.8 | 405 | 391.4 | 11.5 | 10.5 | |
| 6 | Y416.4×6.8 | 430 | 416.4 | 11.5 | 10.5 | |
| 7 | Y451.4×6.8 | 465 | 451.4 | 11.5 | 10.5 | |
| 8 | Y461.4×6.8 | 475 | 461.4 | 11.5 | 10.5 | |
| 9 | Y471.4×6.8 | 485 | 471.4 | 11.5 | 10.5 | |
| 10 | Y506.4×6.8 | 520 | 506.4 | 11.5 | 10.5 | |
| 11 | Y520×6.65 | 533.6 | 520 | 11.5 | 10.5 | |
| 12 | Y576.4×6.8 | 590 | 576.4 | 11.5 | 10.5 | |
| 13 | Y600×6.8 | 613.6 | 600 | 11.5 | 10.5 | |
| 14 | Y620×6.8 | 633.6 | 620 | 11.5 | 10.5 | |
| 15 | Y670×6.8 | 683.6 | 670 | 11.5 | 10.5 | |
| 16 | Y696×6.8 | 709.6 | 696 | 11.5 | 10.5 | |
| 17 | Y730×6.8 | 743.6 | 730 | 11.5 | 10.5 | |
| 18 | Y795×6.8 | 808.6 | 795 | 11.5 | 10.5 | |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
