Metal Splice Closure
Splice closure for ADSS /OPGW/OPPC Cable (Metal)
Hope's metal splice closure is made of aluminum alloy material and protects the connection of optical fiber cables such as ADSS, OPGW, and OPPC cables in aerial towers and poles. Compared to plastic splices, which age poorly and have a short life span, our waterproof aluminum alloy splice closure lasts over 25 years, protecting cables from all kinds of environmental damage. Sealed with silicon material, the splice closure comes in models 1in/1out, 1in/2out, 1in/3out and 2in/2out.
Applicable Scope：
ADSS/OPGW/OPPC optic cable
Features:
1. Wide application: suitable for framing cables, stranding cables, tube armored cables and unarmored cables.
2. Good sealing performance: high quality silicone rubber prevents damage from water and other elements throughout its service life.
3. Resistant to weather: made of high strength imported aluminum alloy
4. High mechanical strength: resistant to vibration, impact, bending, high and low temperatures, and torsion.
5. Customizable structure.
6. Earthing device.
| Brand | HOPE |
| Model | |
| Fiber bending radius (mm) | 47 |
| Each disc retention fiber length (m) | 1.5 |
| Material | Aluminium alloy |
| Temperature performance | -40 ℃ ~ 80 ℃ |
| Resistance strength | 15kV direct-current, 2 Min Not breakdown |
| Anti-vibration performance | 106 Time |
| Lateral pressure (N) | ≥2000N |
| Sealing performance | 100kPa, 72 H, Constant pressure. |
| Main dimensions | Length500mm, Outer diameter200mm, Inner diameter 180mm. |
| Maximum capacity of optical fiber (core) | 2-144 |
| Maximum diameter of fiber optic cable | 22mm |
| Net weight (Kg) | 6.8 |
ADSS/OPGW/OPPC Cable Splice closure Component diagram：
Figure(1) Splice closure for Tower
| 1. Steel belt | 8. Self-adhesive tape |
| 2. Aluminum alloy dome | 9. Sand paper belt |
| 3. Inner (combination of fiber wheel, fixing plate, winder for transit hose, clamp, cap lid and fiber entrance pressing plate) | 10. Electrician's belt |
| 4. Seal grease | 11. Aluminum pipe |
| 5. Fasten connector for S type tower | 12. Heat shrink tube and fiber protection tube |
| 6. Central bolt | 13. Heat shrink tube and bundle straps |
| 7. Transit hose for fiber |
Figure(2) Splice closure for Pole
| 1. Steel belt |
| 2. Aluminum alloy dome |
| 3. Inner (combination of fiber wheel, fixing plate, winder for transit hose, clamp, cap lid and fiber entrance pressing plate) |
| 4. Seal grease |
| 5. Fixing steel tape and steel tape erector used for rod |
| 6. Self-adhesive tape |
| 7. Sand paper belt |
| 8. Electrician’s belt |
| 9. Aluminum pipe |
