Automatic Waste Baler

Request a Quote

View All: http://wastemachineltd.com/2-1-3-waste-baler-high-pressure-unit.html

This Y82W-125ZA automatic waste baler is commonly applied in baling the loose materials, such as scrap paper like carton, news paper, waste plastics like PET bottle, plastic film and recycle case, straws, etc.

Features
1.Controlled by PLC system, this machine is equipped with the touch screen for window monitoring, error warning with synchronous indicator diagram, bale length setting and other operations.
2. The design of floating clamping device on the upper, left and right directions facilitates the automatic distribution of four sided pressure. It makes the machine capable of baling a wide range of materials.
3. Equipped with 6m long conveyor belt, this automatic waste baler is able to load and feed materials automatically. Moreover, it supports automatic binding performance, improving the baling speed.
4. The pushing cylinder and the bale ejector are connected reliably in spherical structure, prolonging the longevity of oil seal.
5. There are several shear blades distributed at the feeding inlet increasing the cutting efficiency.
6. Our automatic waste baler adopts the hydraulic circuit design with low noise to increase the working efficiency and decrease the failure rate.
7. It can be easily mounted without any foundation.
8. The specific dimensional design of the compacting box and the bale is available as required.

Technical Parameters

No.	Technical Parameters					Note
1	Main Hydraulic Cylinder	Model	YG250/180-2500	Quantity	1pcs	125ton
		Nominal Pushing Force	1250kN	Stroke	2500mm
2	Die Clamping Cylinder	Model	YG220/160-150	Quantity	2pcs	200ton
		Nominal Pushing Force	1000 ×2kN	Stroke	150mm
3	Wire Pushing Cylinder	Model	YG80/50-1490	Quantity	2pcs	16ton
		Nominal Pushing Force	80kN	Stroke	1490mm
4	Wire Shearing Cylinder	Model	YG80/50-40	Quantity	1pcs	8ton
		Nominal Pushing Force	80kN	Stroke	40mm
5	Feeding Inlet Size (L×W)		2200mm×1100mm
6	Bale Size (L×W×H)		(1500-2000)mm×1100mm×1100mm
7	Main Hydraulic System Pressure		25.0MPa
8	Assistant Hydraulic System Pressure		16.0MPa
9	Motor for Hydraulic Pump	Model	Y225M-6	Quantity	2 sets	One motor with double shafts
		Rated Speed	980rpm	Nominal Power	30kw
10	Hydraulic Pump 1	Model	160YCY14-1B	Quantity	2 sets
		Rated Discharge	160ml/r	Nominal Pressure	31.5 MPa
11	Hydraulic Pump 2	Model	40YCY14-1B-F	Quantity	1 set	Reverse rotation
		Rated Discharge	40ml/r	Nominal Pressure	31.5MPa
12	Conveyor Chain for Feeding System	Width	1600mm	Length	7.5m
		Gearbox Assembly	XWD7-59-7.5	Motor Power	7.5kw
13	Binding Wire		Annealed metallic wire (Diameter: 4.2mm), 5 lines
14	Bale Density		≥ 400kg/m³
15	Production Capacity		7.5-10.0t/h
16	Bale Weight		750-1150kg/bale
17	Total Power		60 7.5kw
18	Overall Dimension (L×W×H)		11000mm×9500mm×3500mm
19	Machine Weight		22.5 4ton

Note: Above parameters are for reference only. At the premise of meeting baling requirements, it is subject to the parameters of actual fabricated machine.