Silicone Rubber for LED Extrusion
Request a Quote
Applications
This silicone rubber is mainly used for the extrusion of LED neon strips, flexible light strips, LED ribbons, etc.
Features
- Fast extrusion;
- High tensile strength;
- Good processability;
Approvals
ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, etc.
Test
Addition A type agent 0.5%, B type agent 0.8%, 120℃×3min×15Mpa
Technical Data
- Model:
HT-8545S - Appearance: Translucent
- Processability: 220-240
- Hardness (Shore A): 40
- Density (g/cm3): 1.13
- Tensile strength (Mpa): 7
- Elongation (%): 600
- Tear strength (K N/m): 15
- Model:
HT-8555S - Appearance: Translucent
- Processability: 220-240
- Hardness (Shore A): 50
- Density (g/cm3): 1.14
- Tensile strength (Mpa): 7
- Elongation (%): 500
- Tear strength (K N/m): 15
- Model:
HT-8565S - Appearance: Translucent
- Processability: 230-260
- Hardness (Shore A): 60
- Density (g/cm3): 1.15
- Tensile strength (Mpa): 7
- Elongation (%): 400
- Tear strength (K N/m): 15
- Model:
HT-8575S - Appearance: Translucent
- Processability: 260-280
- Hardness (Shore A): 70
- Density (g/cm3): 1.2
- Tensile strength (Mpa): 7
- Elongation (%): 300
- Tear strength (K N/m): 15
- Model:
HT-8585S - Appearance: Translucent
- Processability: 250-280
- Hardness (Shore A): 80
- Density (g/cm3): 1.2
- Tensile strength (Mpa): 7
- Elongation (%): 200
- Tear strength (K N/m): 15
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
