WQ Series Submersible Pump
About WQ
The WQ series submersible pumps are mainly allocated to projects of municipal administration, building, industrial emission of sewage, hotel, hospital, civil defense, mining, etc. This non-clog submersible pump is capable of discharging sewage, waste water, rain, or water for city life, which contains solid particles as well as various long fibers.
Features
1. Unique mechanical seal pattern and bearing structure are taken for better reliability.
2. CFD technology is adopted by the industrial submersible pump for higher efficiency.
3. Compact structure, small volume, light weight, easier for daily maintenance.
4. Low noise submersible working, good for environment protection.
Main Specifications
Flow rate: 10~6000 m3/hr
Head: 3m-62m
Working Conditions
1. The temperature of medium should not exceed 40℃. The density cannot be larger than 1200Kg/m3. The PH value should be between 5 and 9.
2. To learn about the lowest liquid level for the submersible pump’s running, please follow the drawing for installation, “v. with motor cooling system or v. without motor cooling system”.
3. The rated voltage is 380V, and the rated frequency is 50Hz. Only when the deviations of both rated voltage and frequency are not over 5%, the motor can run normally.
4. The largest diameter of the solid grain going through the submersible pump should not be larger than half of that of the water pump outlet.
Performance Curve
