YYW Series Centrifugal Pump
About YYW
Design of YYW series centrifugal pump is based on the YYG series vertical centrifugal pumps. The major change is from the vertical type to a horizontal one, and the performance parameters are identical to those of YYG series. Manufactured in line with the requirements of ISO2858, this single-stage end-suction horizontal centrifugal pump is excellent in quality and performance. It is available in more than 250 types, such as the basic type, flow-expansion type, and the A, B, C cutting type.
Main Specifications
Flow rate: 1.5-2400m3/hr
Head: 8m-150m
Working Conditions
1. The maximum working pressure of the pump system is 1.6MPa, and the maximum head can be 160m. Please notify the pressure for the system at work when ordering. It should be otherwise noted if the working pressure is larger than 1.6 MPa, or the inlet pressure is larger than 0.4Mpa, so as to use cast steel material for the overflow and joint parts.
2. Proper medium: the medium for this sanitary contrifugal pump should be non-corrosive liquid in temperature below 80℃. The volume of non-melting solid in the medium should not be over 0.1% of the unit volume and the graininess should be less than 0.2mm. Please notify at order if the medium to be used has tiny grains.
3. To ensure that the centrifugal pump can work normally, the ambient temperature should not be above 40℃, and the relative humidity should below 95%.
