Standard Bench Center

Request a Quote

View All: http://tooljd.com/2019/7-1-standard-bench-center.html

The standard bench center is principally utilized to inspect the axles, machine parts, and plate type products. It can inspect the ovality, radial runout, accuracy error of end face. Moreover, our measurement tool is unique in design, pretty and elegant in appearance. It is of high precision and can be conveniently used.

Main Parameters of Precision Bench Center

The radial run-out between the Mohs cone and Mohs 2# tip 60° conical surface: ≤0.005mm;
Depth of parallelism between the guide rail and the tip axis within the range of 100mm: ≤0.006mm;
The maximum diameter of tested machine parts: 270mm;
Measure Length: 300mm, 500mm, 1000mm, 1500mm, and 2000mm

Parameters

Size(mm)	Center Height(mm)	Measurement Diameter(mm)	Precision
Size(mm)	Center Height(mm)	Measurement Diameter(mm)	Level Surface (μm)	Vertical Surface(μm)
200	100	200	≤ 8	≤ 5
300	100	200	≤ 8	≤ 5
300	170	340	≤ 8	≤ 5
300	300	600	≤ 8	≤ 5
500	170	340	≤ 8	≤ 5
500	250	500	≤ 8	≤ 5
500	300	600	≤ 8	≤ 5
1000	250	500	≤ 10	≤ 8
1000	300	600	≤ 10	≤ 8
1500	250	500	≤ 20	≤ 16
2000	230	460	≤ 30	≤ 20
2500	300