Conical Seals for Threading Machine
Conical Seals for Threading Machine, Type Z
Did you know that the threading operation may cause the pipe end to deform so it’s not round thereafter? This is due to the thread-cutting tool exerting too much force on the pipe that tends to bend it. Our conical seal, made of filled PTFE compounds, is specially designed for fitting inside the pipe end during a threading operation. When pressurized, the ring would expand radially outward to maintain a tight seal and rigid support against the inside wall of the steel pipe.
Conical Seal Assembly Diagram
| No. | Type | Nominal dia . | Conical seal size | Order No. | |||
| Do | do | h | H | ||||
| 1 | Z 1.9" | 48 | 35.5 | 20.5 | 23.5 | 27.5 | Z215 |
| 2 | Z 2 3/8" | 60.3 | 40 | 20.5 | 23.1 | 27.5 | Z216 |
| 3 | Z 2 3/8" | 60.3 | 42 | 21 | 28 | 32 | Z201 |
| 4 | Z 2 7/8" | 73 | 52 | 27.5 | 27 | 31.4 | Z217 |
| 5 | Z 2 7/8" | 73 | 55 | 27.5 | 28 | 32 | Z229A |
| 6 | Z 2 7/8" | 73 | 60 | 27 | 28 | 32 | Z202 |
| 7 | Z 3 1/2" | 88.9 | 65 | 38 | 27 | 31.5 | Z224 |
| 8 | Z 4" | 101.6 | 75 | 37 | 37.5 | 42 | Z225 |
| 9 | Z 4.5" | 114.3 | 87 | 51 | 37 | 42.5 | Z203 |
| 10 | Z 5-1" | 127 | 94 | 51 | 39 | 44.5 | Z204 |
| 11 | Z 5-2" | 127 | 101.4 | 51 | 39 | 44.5 | Z205 |
| 12 | Z 5.5-1 " | 139.7 | 109 | 66 | 38 | 43.5 | Z206 |
| 13 | Z 5.5-2" | 139.7 | 117.6 | 66 | 38 | 43.5 | Z207 |
| 14 | Z 6 5/8 " | 168.3 | 136 | 97 | 44 | 51 | Z208 |
| 15 | Z 7" | 177.8 | 145 | 106 | 44 | 51 | Z209 |
| 16 | Z 7"B | 177.8 | 152.5 | 94 | 44.5 | 50 | Z210 |
| 17 | Z 7 5/8" | 193.7 | 158 | 119 | 44 | 51 | Z211 |
| 18 | Z 8 5/8" | 219.1 | 187 | 147 | 44 | 51 | Z212 |
| 19 | Z 9 5/8" | 244.5 | 210 | 170 | 44 | 51 | Z213 |
| 20 | Z 10 3/4" | 273 | 236 | 190 | 47 | 54 | Z221 |
| 21 | Z 10 3/4" | 273.1 | 240 | 200 | 48 | 55 | Z214 |
| 22 | Z 11 3/4" | 298.5 | 260 | 217 | 47 | 54 | Z222 |
| 23 | Z 13 3/8" | 339.7 | 307 | 260 | 47 | 54 | Z223 |
Internal Expansion and Support Device for Conical Seal
While it may look like an awl, this so-called internal expansion and support device is actually used to push into the opening of the conical seal so that it expands the seal until the seal is held tightly against the inside wall of the steel pipe.
Operating Conditions
Operating media: water, emulsified liquid, hydraulic oil
Operating temperature: -20~ 80°C
Internal expansion and support device, type I
| No. | Type | Pipe dia . | Max. inner dia . | Min. inner dia . | Conical ring order No. | Expansion device order No. |
| D | d max | d min | ||||
| 1 | 1.9" | Φ48.26 | Φ40.9 | Φ38.1 | Z215 | ZG101 |
| 2 | 2 3/8" | Φ60.32 | Φ51.48 | Φ43.24 | Z216 | ZG102 |
| 3 | 2 7/8" | Φ73.02 | Φ62 | Φ55.74 | Z217 | ZG103 |
| 4 | 3 1/2“ | Φ88.9 | Φ77.92 | Φ69.86 | Z224 | ZG104 |
| 5 | 4" | Φ101.6 | Φ90.12 | Φ88.9 | Z225 | ZG105 |
| 6 | Z 4 1/2" | Φ114.3 | Φ103.88 | Φ97.18 | Z203 | ZG106 |
| No. | Type | Pipe dia . | Max.inner dia . | Min.inner dia . | Conical seal order No. | Expansion device order No. |
| D | d max | d min | ||||
| 1 | 5" | Φ127 | Φ115.82 | Φ104.8 | Z205 | ZG201 |
| 2 | 5 1/2" -1 | Φ139.7 | Φ124.26 | Φ114.3 | Z206 | ZG202 |
| 3 | 5 1/2" -2 | Φ139.7 | Φ127.3 | Φ120.38 | Z207 | ZG203 |
| 4 | 6 5/8“ | Φ168.28 | Φ153.64 | Φ144.16 | Z208 | ZG204 |
| 5 | 7" | Φ177.8 | Φ166.06 | Φ150.36 | Z209 | ZG205 |
| 6 | 7 5/8" | Φ193.68 | Φ178.04 | Φ161.92 | Z211 | ZG206 |
| 7 | 8 5/8" | Φ219.08 | Φ205.66 | Φ190.78 | Z212 | ZG207 |
| 8 | 9 5/8" | Φ244.48 | Φ228.64 | Φ213.54 | Z213 | ZG208 |
| 9 | 10 3/4" | Φ273.05 | Φ258.87 | Φ242.83 | Z214 | ZG209 |
| 10 | 11 3/4" | Φ298.45 | Φ279.45 | Φ271.33 | Z222 | ZG210 |
| 11 | 13 3/8" | Φ339.7 | Φ322.96 | Φ313.6 | Z223 | ZG211 |
