Abrasion-Resistant Semi-Rigid Dual Wall Heat Shrink Tubing
Request a Quote
Website: http://heat-shrinktube.com/1-1-6-abrasion-resistant-semi-rigid-dual-wall-heat-shrink-tubing.html
CB-DWT (2000)
Adhesive Lined Heat Shrink Tube for Automotive
- Outer jacket: Semi-rigid cross-linked modified polyolefin
- Inner wall: Modified hot-melt adhesive
- Shrink ratio: 1.5:1
- Minimum shrink temperature: 110°C
- Continuous operating temperature: -35°C~125°C
Applications
- Our abrasion-resistant semi-rigid dual wall heat shrink tubing is meticulously designed to provide ideal protection for automotive brake and fuel oil tubes.
- Each size of the CB-DWT (2000) tubing is designed for a specific range of metal oil tubes, ensuring superior protection against mechanical damage and moisture corrosion in demanding conditions.
Features
- Shrink ratio: 1.5:1
- Minimum shrink temperature: 110°C
- Continuous operating temperature: -35°C~125°C
- High scratch resistance
- Good flexibility in low temperatures
- Compliant with automotive standards
- High oil and chemical resistance
- Rapid shrinkage at above 115°C, allowing the tubing to conform to bent shapes after installation
- Tested by the National Automobile Quality Supervision and Inspection Center
| Properties | Test Method | Performance | Baseline |
| Longitudinal change | ASTMD2671 | -10%~0 | -2% |
| Eccentricity | ASTMD2671 | ≤20% | 10% |
| Tensile strength | ASTMD2671 | ≥12Mpa | 14Mpa |
| Ultimate elongation | ASTMD2671 | ≥300% | 460% |
| Heat aging test | - | - | - |
| Tensile strength after aging | ASTMD2671 | ≥12Mpa | 13Mpa |
| Ultimate elongation after aging | ASTMD2671 | ≥270% | 410% |
| Deformation resistance | ASTMD746 | ≥50% | 82% |
| Impact resistance | ASTMD746 | -35°C, No cracking | No cracking |
| Drop impact resistance | ASTMD746 | No cracking | No cracking |
| Low temperature resistance (-35°C/1h) | ASTMD746 | No cracking | No cracking |
| Environmental stress cracking resistance (50°C/24h) | ASTMD1693 | No cracking | No cracking |
| Solvent resistance (sulfuric acid density 1.28, sodium hydroxide 0.1N, automotive brake fluid, and lead-free gasoline, 25°C/72h) | ASTMD2671 | No cracking | No cracking |
Shrink Ratio: 1.5:1
| Size | Standard Steel Pipe Outer Diameter (mm) | Inside Diameter after Recovery (mm) | Wall Thickness (mm) |
| CB2000-5 | 3.50 | ≥5.0 | 1.0 |
| CB2000-6 | 4.76 | ≥6.0 | 1.0 |
| CB2000-8 | 6.35 | ≥8.0 | 1.0 |
| CB2000-10 | 8.00 | ≥10.0 | 1.0 |
| CB2000-15 | 10.0 | ≥15.0 | 1.0 |
| CB2000-14 | 4.85 | ≥14.0 | 1.0 |
Note: The standard color is black. Please refer to the steel pipe outer diameter when placing an order. Custom sizes are available.
Related Manufacturies
Leave Message
Similar Manufacturies and Parts
Manufacturer Advertising
More
Similar Manufacturies and Parts
Videos
