10KV Series Reactor

Request a Quote

View All: http://rxpe-svc-sc.com/2-2-1-technical-principle.html

Applications
Our CKSC 10KV series dry-type reactor can be applied in electrical systems under 35 kilovolts with high-voltage capacitors. The reactor can effectively reduce higher harmonics, limit inrush currents and switching surges, and make the power system work better with added safety and higher quality. Besides, the reactor can also eliminate short-circuit currents, and absorb harmonics in filters.

Environment requirements
1. Altitude under 2000 meters.
2. Working temperature -25℃~ 45℃, relative humidity under 90%.
3. No noxious fumes in the environment and no flammable objects should be around.
4. Good airiness. Ventilation devices are required if the product is used in a cabinet.

Technical parameters
1. Our 10KV series dry-type reactor is compatible with electrical systems of 400V and 660V.
2. Reactance: 1%, 4.5%, 5.6%, 6%, 7%, 12%, 13.8%, 14%.
3. Rated insulation level 3KV/min.
4. Temperature increase limits: iron core ≤ 85K, coil ≤ 95K.
5. Noise level ≤ 45dB
6. Overload capacity: continuous working is guaranteed when overload rate is under 1.35.
7. Degree of linearity: the reactance drop is lower than 5% when working on 1.8 times of rated current.
8. Reactance error under ±3%.
9. Temperature classification: H (180℃).

Specifications

Reactor model	Matching capacitor	Reactor capacity (Kvar)	Inductance (mh)	Outline size LxWxH(mm)	Install size (mm)
CKSC-6/10-6%	100	6	3X233.223	650x360x660	400x320
CKSC-9/10-6%	150	9	3X153.514	700x360x670	400x320
CKSC-12/10-6%	200	12	3X115.501	720x380x700	400x320
CKSC-18/10-6%	300	18	3X77.246	730x380x700	400x320
CKSC-27/10-6%	450	27	3X51.388	780x400x710	450x350
CKSC-30/10-6%	500	30	3X46.289	800x400x750	450x350
CKSC-36/10-6%	600	36	3X38.500	800x400x750	450x350
CKSC-45/10-6%	750	45	3X30.781	800x400x750	450x350
CKSC-54/10-6%	900	54	3X25.694	830x400x780	450x350
CKSC-60/10-6%	1000	60	3X23.100	850x400x800	500x350
CKSC-72/10-6%	1200	72	3X19.250	850x400x800	500x350
CKSC-90/10-6%	1500	90	3x15.410	900x400x850	500x350
CKSC-108/10-6%	1800	108	3x12.833	920x400x850	500x350
CKSC-126/10-6%	2100	126	3x11.005	950x420x900	500x380
CKSC-144/10-6%	2400	144	3x9.625	960x420x920	500x380
CKSC-162/10-6%	2700	162	3x8.559	1000x450x1050	550x400
CKSC-180/10-6%	3000	180	3x7.700	1000x450x1050	550x400
CKSC-198/10-6%	3300	198	3x7.002	1000x450x1100	550x400
CKSC-216/10-6%	3600	216	3x6.420	1100x480x1150	600x400
CKSC-240/10-6%	4000	240	3x5.778	1100x500x1200	600x420
CKSC-252/10-6%	4200	252	3x5.503	1150x500x1200	600x420
CKSC-288/10-6%	4800	288	3x4.814	1200x520x800	600x420
CKSC-300/10-6%	5000	300	3x4.622	1200x550x1250	600x420
CKSC-360/10-6%	6000	360	3x3.851	1350x600x1300	650x430
CKSC-480/10-6%	8000	480	3x2.888	1610x800x1700	1000x700

Note
The tables above show our standard product lines. Customize service is also provided to meet other requirements. Some of our product sizes may have changed due to product improvements.

Features
1. Two kinds of dry series reactors with iron cores are provided: three-phase and single-phase.
2. The iron cores are made from cold rolled silicon steel of good quality. The high speed punching in the material processing provides clean material with smaller burrs.
3. Coils are made from well insulated wires with special appliance, and the surfaces of coils are smooth.
4. All the clamping devices are made of non-magnetic material and are corruption-proof. The drying, vacuum varnishing and drying process ensures the tightness of reactor coils, significantly reduces useless heat and noises and adds to the high quality of series reactor.
5. The outer shell is designed accordingly to the standardized cabinet size. The device is small and wiring is very convenient.