3 Roll Plate Bending Machine (Variable Axis Plate Roll W11XNC) Manufacturer

3 Roll Plate Bending Machine (Variable Axis Plate Roll W11XNC)

Request a Quote

View All: http://fabricaitonmachines.com/2-7-variable-axis-plate-bending-machine.html

This variable geometry, or variable axis 3 roll plate bending machine can cold-roll plate of 245MPa yield strength to round, conical and circular arc shapes. Featuring a top roll that moves vertically and two lower rolls latterly, the 3 roll plate bending machine is built to cold roll plates of 6-60mm in thickness and 1500mm-3000mm wide.

The 3 roll plate bending machine has a slight advantage in cycle time since it permits pre-bending the leading edge, rolling the cylinder body and finishing off the trailing edge all while rolling in one single direction, without the need to reverse the rotation direction or of the removal and re-insertion of the plate in order to pre-bend both-ends of one plate.

Brief Description
Pre-bending both the leading edge and trailing edge of the plate reduces the length of unbent flat and improves rolling efficiency. Most often found in petroleum, chemical engineering, boiler, metal structure, and machinery manufacturing applications.

Sample Showcase

Model Selection

Model No.	Maximum Plate Width mm	Plate Thickness for Pre-bending mm	Maximum Plate Thickness for Rolling mm	Minimum Rolling Diameter at Full Load mm	Plate Yield Strength Mpa	Top Roll Diameter mm	Lower Roll Diameter mm	Rolling Speed m/min	Motor Power Kw	Unbent Flat Length mm	Note
W11XNC-12x2000	2000	10	12	700	245	290	250	5	7.5	2xS	∫:Steel Plate Thickness
W11XNC-16x2000	2000	12	16	750	245	310	290	5	15	2xS
W11XNC-20x2000	2000	16	20	850	245	350	300	5	25	2xS
W11XNC-25x2000	2000	20	25	950	245	380	340	5	30	2xS
W11XNC-30x2000	2000	25	30	1100	245	460	420	5	45	2xS
W11XNC-12x2500	2500	10	12	750	245	310	290	5	15	2xS	∫:Steel Plate Thickness
W11XNC-16x2500	2500	12	16	850	245	350	300	5	25	2xS
W11XNC-20x2500	2500	16	20	950	245	380	340	5	30	2xS
W11XNC-25x2500	2500	20	25	1100	245	460	420	5	45	2xS
W11XNC-30x2500	2500	25	30	1300	245	520	460	4	55	2xS
W11XNC-35x2500	2500	30	35	1400	245	560	480	4	60	2xS
W11XNC-40x2500	2500	35	40	1500	245	600	520	4	75	2xS
W11XNC-50x2500	2500	40	50	1700	245	680	560	4	125	2xS
W11XNC-60x2500	2500	50	60	1850	245	740	640	4	160	2xS
W11XNC-12x3000	3000	10	12	800	245	330	300	5	15	2xS	∫:Steel Plate Thickness
W11XNC-16x3000	3000	12	16	900	245	360	320	5	25	2xS
W11XNC-20x3000	3000	16	20	1000	245	400	350	5	30	2xS
W11XNC-25x3000	3000	20	25	1300	245	520	440	4	45	2xS
W11XNC-30x3200	3200	25	30	1400	245	560	480	4	55	2xS
W11XNC-32x3000	3000	26	32	1400	245	560	480	4	60	2xS
W11XNC-40x3000	3000	35	40	1700	245	680	560	4	75	2xS
W11XNC-50x3000	3000	40	50	1850	245	740	640	4	125	2xS
W11XNC-12x4000	4000	10	12	1050	245	420	280	5	22	Via a special process, we can totally remove the unbent flat.	Widely Placed in Electric Power Distribution Industry
W11XNC-16x4000	4000	12	16	1200	245	480	320	4	37
W11XNC-20x4000	4000	16	20	1300	245	520	380	4	45
W11XNC-25x4000	4000	20	25	1400	245	560	420	4	55
W11XNC-18x4500	4500	16	18	1250	245	500	360	4	45
W11XNC-12x5000	5000	10	12	1200	245	480	320	4	37
W11XNC-20x5000	5000	16	20	1350	245	540	380	4	45
W11XNC-25x5000	5000	20	25	1500	245	600	420	4	55