Semi Automatic Vertical Piston Filler
The semi automatic vertical position filler is suitable for filling low viscosity and high fluidity liquids, such as silicone sealant, modified saline adhesive and potting sealant, etc.
This piston filler has vertical structure and two filling modes. Free changeover is available for different filling materials.
| Filling speed | 3-6 cartridges/min |
| Filling accuracy | ±15g/2600ml |
| Filling range | 2000ml-2600ml |
| Overall power | 4.5KW |
| Gas pressure | 0.6MPa |
| Gas consumption | 60L/min |
| Working pressure of hydraulic system | 6-8Mpa |
| Hydraulic cooling mode | Circulating water cooling |
| Machine size (L x W x H) | 12000x800x2000mm |
| Net weight | 0.8T |
Note: Great is able to match the voltage and frequency of the fillers based on clients from different locations.
- Metering system Volume filling mode is stable and reliable, with minimal metering errors. The volume can be manually adjusted.
- Filling device
Two filling modes are provided, that is bottom-up filling and opening-up filling, of free changeover.
When adopts opening-up filling, the cartridges should be plunger inserted at first. Put the cartridge on the corresponding mold with its opening up. During filling, the materials are absolutely isolated from the outside air.
If using bottom-up filling mode, the cap should be screwed firstly. Put the cartridge on the corresponding mold with the bottom up. This suits filling low viscosity and high fluidity materials. - Plunger inserting and air discharging devices
Two plunger inserting modes are available and can be changed over freely, equipped with foot-switch control.
