Coriolis Mass Flowmeter
HG-CMFI Coriolis mass flowmeter is a patented flow measurement solution developed by our company. It offers the most accurate measurement available for virtually any process fluid, while exhibiting exceptionally low pressure drop.
Without the need for additional equipment, manual calculations, or estimations, the Coriolis mass flowmeter supports direct measurement of mass flow, volume flow, density, and temperature for liquids and slurries. It has unsurpassed performance even under the harshest operating environments.
This line of Coriolis flow meter comes without movable parts, or any special mounting or flow conditioning requirements. To meet each of your demands, it is fabricate with stainless steel wetted parts and a wide variety of process connections.
Technical Specifications (Table 1)Titles | Technical Specifications |
Mass flow accuracy | ±[ 0.2% (zero stability /flow rate×100%)] |
Mass flow repeatability | ±( 1/2 )×[0.2% (zero stability /flow rate×100%)] |
Density range | 0.2 g /cm3 ~ 3.5g /cm3 |
Density accuracy | ±0.002g/cm3 |
Temperature range | -60 ℃ ~ 200 ℃ |
Temperature accuracy | ±1 ℃ |
Current output | 4mA ~ 20mA |
Frequency/pulse output | 0Hz ~ 10kHz |
Contact capacity of a Batch Control relay | 24V/0.1A |
Contact form | normally open (normally close available for special orders) |
Parameters of Working Conditions (Table 2)
Titles | Parameters |
Temperature range of fluid | -40 ℃~ 200 ℃ |
Ambient temperature | 0 ℃~ 40 ℃ |
Environmental humidity | ≤90% RH, non condensation |
Atmospheric pressure | 86kPa~106kPa |
Power supply of transmitters | Power supply Voltage: AC(220±10%)V, (50±5%)Hz Composite Voltage: DC (24±10%) V |
Power | < 15W |
Specs | Line Sizes ( mm ) | Flow Range ( t/h ) | Calibration Range ( t/h ) | Max. Working Pressure ( MPa ) | Zero Stability ( t/h ) | Velocity Parameter ( h m/t s ) |
DN1 | 1 | 0~0.04 | 0.004~0.04 | 30.0 | 0.000008 | 353.7 |
DN3 | 3 | 0~0.35 | 0.035~0.35 | 30.0 | 0.000067 | 39.3 |
DN6 | 6 | 0~0.7 | 0.07~0.7 | 30.0 | 0.00016 | 19.65 |
DN10 | 10 | 0~1.2 | 0.12~1.2 | 30.0 | 0.0002 | 4.912 |
DN15 | 15 | 0~6.4 | 0.64~6.4 | 4.0 | 0.0011 | 2.183 |
DN25 | 25 | 0~16 | 1.6~16 | 4.0 | 0.002 | 0.902 |
DN40 | 40 | 0~40 | 4~40 | 4.0 | 0.003 | 0.334 |
DN50 | 50 | 0~65 | 6.5~65 | 4.0 | 0.006 | 0.197 |
DN80 | 80 | 0~160 | 16~160 | 2.5 | 0.01 | 0.0873 |
DN100 | 100 | 0~250 | 25~250 | 2.5 | 0.015 | 0.0544 |
DN150 | 150 | 0~550 | 55~550 | 2.5 | 0.03 | 0.0239 |