KELI Load Cell

KELI Load Cell
KELI Load Cell
KELI Load Cell
KELI Load Cell
KELI Load Cell
KELI Load Cell
KELI Load Cell
KELI Load Cell
Request a Quote

The KELI load cell is practically engineered for all kinds of high-precise vehicle scales, railroad scales, batching scales and special scales.

Advantages
1. This weight sensor is fabricated by KELI Sensing Technology (Ningbo) Co., Ltd. which has been leading the development of vehicle scale and railroad scale for over 10 years.
2. The stability of the digital load cell has been upgraded into a whole new level by utilization of pre-diagnosis concept. You are within easy access to operating status of your weight scale.
3. This scale accessory is fitted with built-in micro-processer to continuously offer compensation to exterior impacts such as temperature, non-linear, delay, voltage change and creep, etc. As a result, your electronic weighing machine is ensured to provide more precise weighing.

Classifications

1. QS-A Load Cell
    Rated Load (t) 5 10, 15, 20, 25, 30 40
    D1 68 85-88 88
    D2 50.8 76.2 76.2
    H 168.8 224.7 230.7
    L 224 240 240
    Technical Parameters (4 Wires: Exc (Red), Exc-(Black), Sig (Green), Sig-(White)
    Rated Weighing (Emax) 5/10/15/20/25/30/40/50t
    Sensitivity 2.0±0.002mV/V
    Accuracy Class C1-C5
    Zero Balance ±1%F.S
    Temperature Effect on Zero Output ±0.02%F.S/10℃
    Output Temperature Effect ±0.02%F.S/10℃
    Input Impedance 750±10Ω
    Output Impedance 702±3Ω, 703±5Ω (L≥15m)
    Insulation Impedance ≥5000MΩ
    Temperature Compensation Range -10℃- 40℃
    Working Temperature Range -30℃- 70℃
    Safe Overload 150%F.S
    Ultimate Overload 200%F.S
    Suggested Excitation Voltage 10-12V DC
    Max. Excitation Voltage 15V DC
    IP Rating IP68 (5-50t)
    Material Alloy Steel/Stainless Steel
    Cable Length=L: 5.2m (5t), 8m (10t), 10m (15t), 10/12m (20t), 12/15m (25t), 12/16m (30t), 16m (40-50t)
    Diameter: Φ6mm

    2. QS-D Load Cell

    Technical Parameters
    A/D Module Resolution 100000
    Data Refresh Rate 15HZ
    Communication Baud Rate 9600BPS
    Total Accuracy ±0.02%F.S
    Creep (30mins) ±0.02%F.S
    Temperature Coefficient ±0.02%F.S/10℃
    Working Temperature Range -30- 70℃
    Zero Balance ±0.01%F.S
    Safe Overload 150%F.S
    IP Rating IP68
    Recommended Input Voltage 9-12VDC
    Max. Output Voltage 20VDC
    Max. Signal Transmission Distance 1200m
    Rated Load 10, 15, 20/25, 30, 40t
    Rated Output 20000/25000/30000/40000

    3. SQB-D Load Cell

    Technical Parameters
    Rated Load 0.5,0.75,1,1.5,2,2.5,3,5,7.5,10t
    Rated Output 20000
    A/D Module Resolution 200000
    Date Refresh rate 50Hz
    Communication baud rate 9600BPS
    Accuracy ±0.02%F.S
    Creep error (30min) ±0.02%F.S
    Temperature Coefficient ±0.02%F.S/10℃
    Working Temperature Range -30℃- 70℃
    Zero Balance ±0.1%F.S
    Safe Overload 150% F.S
    IP Rating IP68
    Recommended Input Voltage 9-12V DC
    Max. Input Voltage 20VDC
    Max. Signal Transmission Distance 1200m

    4. ZSFB-D Load Cell

    Technical Parameters: 4 Wires: Exc (Red), Exc-(Black), Sig (Green), Sig-(White)
    A/D Module Resolution 60000
    Working Temperature Range -30- 70℃
    Rated Load (Emax) 20/25/30/40/50t
    Safe Overload ±0.02%F.S/10℃
    Rated Output 20000/25000/30000/40000/50000
    Ultimate Overload 150% F.S
    Data Refresh Frequency 50Hz
    Recommended Excitation Voltage IP68
    Communication BPS Rate 9600BPS
    Max. Excitation Voltage 9-12VDC
    Accuracy Class C3
    Max. Input Voltage 20VDC
    Max. Signal Transmission Distance 1200m
    Temperature Coefficient ±0.02%F.S
    Cable Length: 12m (20t), 15m (25t), 16m (30-50t)
    Temperature Compensation Range -10℃- 40℃
    Diameter Ф5mm

    5. ZSFY-A Load Cell

    Technical Parameters: 4 Wires: Exc (Red), Exc-(Black), Sig (Green), Sig-(White)
    Rated Capacity (Emax) 10/15/20/25/30/40/50t
    Sensitivity 2.0±0.002mV/V
    Accuracy Class C2-C5
    Zero Balance ±1%F.S
    Temperature Impact on Zero Output ±0.02%F.S/10℃
    Temperature Output Effect ±0.02%F.S/10℃
    Input Impedance 400±10Ω (ZSF), 700±20Ω (ZSFY)
    Output Impedance 352±3Ω, 352±5Ω (L≥15m) (ZSF), 706±7Ω (ZSFY)
    Insulation Impedance ≥5000MΩ
    Temperature Compensation Range -10℃- 40℃
    Working Temperature Range -30℃- 70℃
    Safe Overload 150%F.S
    Ultimate Overload 250%F.S
    Recommended Excitation Voltage 10-12VDC
    Max. Excitation Voltage 15VDC
    IP Rating IP68
    Materials Alloy Steel, Stainless Steel
    Cable Length: 8m (10t), 10m (15t), 12m (20-25t), 14m (30t), 16m (40-50t)
    Diameter Ф5mm

    Related products
    Send Message
    Other Products
    Inquiry
    Inquiry