Self Aligning Ball Bearings
Instruction
1. The self aligning ball bearing has a spherical raceway and two rows of balls. Then, the inner ring, retainer and balls can freely rotate in the bearing center. Allowable angle adjustment ranges from 1.5 degrees to 3 degrees, so this double-row bearing is especially suitable for use in transmission shafts.
2. Our product is primarily used to withstand radial load, while simultaneously bearing a small amount of axial load. Its speed limit is lower than that of a deep groove ball bearing. However, its friction is the lowest among all rolling bearings, which allows the low-friction bearing to have a small temperature rise even at high rotational speed.
3. The self aligning ball bearings are commonly used in all kinds of high-speed machines including the textile machinery, agricultural harvester, air blowers, papermaking machines, and the woodworking machines, etc. Low temperature makes the bearing equipment more stable and durable.
Product Classification
1. 1:12 tapered bore type
2. Double-sided seal ring type without retainer or inner ring
3. Single row ball type with double-sided dustproof cover
The latter two types of self aligning ball bearings are basically applied in places where strong dust resistance is required.
Structural Diagram
- Cylindrical Bore (Nylon)
- Cylindrical Bore (Steel)
- Tapered Bore (Nylon)
- Tapered Bore (Steel)
Related Names
Sealed Ball Bearing | Shielded Self-Aligning Ball Bearing | Bearing With Cylindrical Bore
Parameters
| Series | Bore Diameter (mm) | Variant Structure | ||
| Cylindrical Bore | Tapered Bore | |||
| 1200 1200K | 10-120 | 10-120 | 2RS | H200 |
| 1300 1300K | 10-110 | 10-110 | 2RS | H300 |
| 2200 2200K | 10-110 | 10-110 | 2RS | H300 |
| 2300 2300K | 10-110 | 10-110 | 2RS | H2300 |
Related Names
Industrial Bearing | Bearing With Tapered Bore | Bearing Equipment
