Q43 - 2500 Alligator Shear
The Q43-2500 alligator shear is used to get qualified furnace charge through cutting diverse scrap shaped steel section and structural metals at cold state like round steel, square steel, angle iron, I steel, steel plate and pipe, etc. It is commonly seen in the medium sized metal processing plant, steel works, scrap metal recycling site and so on. If there is no power at site, this product can be activated by diesel engine according to the demands of users.
The major strong points of the alligator shear are balanced and steady transmission, stable running speed against load change. Controlled by buttons, the machine is able to accomplish the automatic cutting and manual feeding. Highly praised by customers from Russia and Ukraine, this product has been sold nearly 300pcs to these customers in the past two years.
Technical Parameters| No. | Parameters | Note | |||||
| 1 | Shear Cylinder | Type | YG250/160-540 | Quantity | 1pcs | ||
| Nominal Thrust | 2500kN | Stroke | 540mm | ||||
| 2 | Clamping Cylinder | Type | YG125/90-347 | Quantity | 1pcs | ||
| Nominal Thrust | 260kN | Stroke | 347mm | ||||
| 3 | Hydraulic System Working Pressure | 25MPa(Max. Pressure 27MPa) | |||||
| 4 | Oil Tank Capacity | 2160L | |||||
| 5 | Working Length of Blade | 1200mm | |||||
| 6 | Size of Major Applicable Materials | Common steel materials | |||||
| 7 | Cutting Frequency | 6-8times/min. | |||||
| 8 | Control Mode | Manually | |||||
| 9 | Max. Blade Opening | 450 | |||||
| 10 | Oil Pump | Model | 80YCY14-1B | Rated Pressure | 31.5MPa | ||
| Flow Quantity | 80ml/r | Quantity | 2pcs | ||||
| 11 | Motor | Model | Y180M-4 | Rated Speed | 1460rpm | ||
| Power | 18.5kw | Quantity | 2pcs | ||||
| 12 | Overall Dimension | 2650mm×1024mm×1880mm | |||||
| 13 | Overall Power | 18.5×2 9kw | |||||
| 14 | Overall Weight | 9.5ton | |||||
Related Names
Wanshida Hydraulic Shear | Hydraulic Metal Shear | CE Approved Scrap Metal Shear | Alligator Shear | Crocodile Shear | Metal Shearing Machine
