MEMS MM 1xN Optical Switch - Module

Request a Quote

Website: http://laserdiodedevice.com/7-1-4-mems-mm-1xn-switch-module.html

Optical Specifications

PARAMETER		VALUE	UNIT	NOTE
Wavelength Range		8:850 only 13:1310 only	nm	Single-band: 8 or 13
Test Wavelength		850 or 1310	nm	Each test wavelength is the CWL of a specific wavelength range
Channels		2~32		N
Insertion Loss @8	1x2	≤0.8	dB	1. IL is measured at CWL, 23° C 2. If with standard connectors, IL increases by 0.2~0.3dB
	1x4
	1x8	≤1.0
	1x12	≤1.2
	1x16	≤1.4
	1x24	≤1.6
	1x32	≤1.8
Insertion Loss @8&13	1x2	≤1.2
	1x4
	1x8	≤1.4
	1x12
	1x16	≤1.6
	1x24	≤2.0
	1x32	≤2.4
Return Loss		≥30	dB	Or customer-defined
Repeatability		≤0.05	dB	Repeatability is defined after 100 cycles
Crosstalk	N≤16	≥30	dB	Or customer-defined
	16⁢N≤32	≥25
Temperature Dependent Loss	N≤16	≤0.3	dB
	16⁢N≤32	≤0.4	dB
Switch Time	2≤N≤16	≤5	ms	7. Excluding protocol transmission time 8. When using optimized voltage ramp 9. Faster 1xN switching time version available upon request
	16⁢N≤32	≤10
Durability		≥1x10⁹	cycle
Maximum Optical Power		≤500	mW

Electrical and Mechanical Specifications

PARAMETER	VALUE	UNIT	NOTE
Latching Type	Non-latching
Control Type	UART or parallel
Supply Voltage	5±0.25	V
Power Consumption	≤0.7	W
Dimension	68x30x13	mm	2≤N≤16
	75x30x13		16⁢N≤32

（All specifications apply to MS M1）