Blow Molding Machine (PET Bottle Machine for Making Maximum 2L or 5L Plastic Bottle)
Here at LONGHONG, as the Chinese leading manufacturer of blow molding machine, we can offer you all kinds of PET blowing machines for cosmetics, mineral water and oil bottles and wild-mouth bottles as well as auxiliary products. This blow molding machine shown here is a PET bottle machine for making maximum 2L or 5L plastic bottles.
According to customer's demands, we can design and manufacture various blow molds for making different bottles which can be used as the package of sodas, mineral water, oil, cosmetics and pesticides etc.
Technical Parameters of this Blow Molding Machine| Model | ITEM | | |
| Productivity | Depend on bottle design | 800-1200 PCS/H | 500-800PCS/H |
| Product type | volume | 0.1-2L | 2-5L |
| Body diameter | ≤100mm | ≤175mm | |
| Height | ≤330mm | ≤330mm | |
| Neck diameter | ≤30mm | ≤45mm | |
| Mould | Cavity | 1 | 1 |
| Mold thickness | 240mm | 260mm | |
| Mold size | 300×240×380 | 300×260×380 | |
| Main machine power | Electrical source power | 380V/220V, 50/60HZ 3Phase | 380V/220V, 50/60HZ 3Phase |
| Power | 25kw | 25kw | |
| Really use power | 7kw | 10kw | |
| Air system | HP air compressor | 1.6m3/min, 3.0Mpa | 1.6m3/min, 3.0Mpa |
| LP air compressor | / | 1.0m3/min, 1.0Mpa | |
| Air Tank | / | 0.6m3/min, 3.0Mpa | |
| Air dryer | 1.0m3/min, 3.0Mpa | 2.0m3/min, 3.0Mpa | |
| Cooling water | Water Chiller | 3HP | 3HP |
| Machine | Size(L×W×H) | 1500×1200×1800mm | 2000×1200×1800mm |
| Weight | 1500kg | 1800kg | |
| Preform unscrambler | Size(L×W×H) | 2000×950×2480mm | 2000×950×2480mm |
| Weight | 250kg | 250kg |
Features
1. This blow molding machine features reasonable design, fully automatic control, and computer controlled operation. The distance between PET preforms is small, allowing uniform heating.
2. The plastic bottle making machine is provided with automatic preform feeding system, effectively reducing labor and power consumption.
3. It adopts fan shaped clamping unit which can shorten air cylinder diameter and improve production speed.
4. The whole blow molding machine employs modular assembly method, which greatly simplify local maintenance caused by technological improvement.
5. This PET stretch blow molding machine comes with automatic control by full computer system. The analog input module will complete collection and measurement of heating temperature and preform surface temperature.
