Insert Bearings with Adapter Sleeve Locking Manufacturer

Insert Bearings with Adapter Sleeve Locking

Request a Quote

View All: http://colorpowdercoater.com/7-2-6-insert-sleeve.html/127684/index.html

UK200 series insert bearing’s inner ring is a taper inner bore of 1:12 and it can be installed directly on a tapering spindle or work with an adapter sleeve. Fine tuning of bearing clearance can be achieved. Compared with an insert bearing with set screw, which has the same inner diameter, this rolling-element bearing can bear higher load. It also has higher rotation speed and higher bearing capacity than UC and HC types with the same inner diameter.

The insert bearings with adapter sleeve locking have extremely high bearing capacity and small radial cross section. They also save space and have relatively low rotation speed, which reduces consumption of force and achieves safety protection.

Thisball bearing is suitable for machines involved with vibration and impact load and occasions with high requirements for vibration and rotation accuracy. It is also used to connect two shafts.

UK200 H2300 Insert Bearings with Adapter Sleeve Locking

Bearing No.	shaft		Dimensions(mm)							w	Basic dynamie Load ratings (KN)	Basic static Load ratings (KN)	Bearing No.	Adapter sleeve No.	Weight (kg)
	d		d1	D	Be	B1	L	t	r
	(in)	(mm)
		20	25	52	17	23	35	4.5	8	38	10.78	9.93	UK205	H2305	0.24
	3/4													HE2305	0.25
		25	30	62	19	26	38	5.1	8	45	14.97	11.31	UK206	H2306	0.40
	15/16													HA2306	0.41
	1													HA2306	0.37
		30	35	72	20	28	43	5.8	9	52	19.75	15.30	UK207	H2307	0.55
	1-1/8													HS2307	0.57
	1-3/16													HA2307	0.55
		35	40	80	21	29	46	6.2	10	58	25.09	19.84	UK208	H2308	0.72
	1-1/14													HE2308	0.78
		40	45	85	22	30	50	6.5	11	65	25.14	20.46	UK209	H2309	0.93
	1-7/16													HA2309	0.89
	1-1/2													HE2309	0.95
		45	50	90	22	32	55	6.5	12	70	26.98	23.18	UK210	H2310	0.80
	1-11/16													HA2310	0.89
	1-3/4													HE2310	0.84
		50	55	100	25	36	59	7.3	12	75	33.37	29.22	UK211	H2311	1.19
	1-7/8													HS2311	1.28
	2													HE2311	1.17
		55	60	110	27	38	62	7.7	13	80	36.74	32.93	UK212	H2312	1.52
	2-1/8													HS2312	1.56
		60	65	120	29	40	65	8.3	14	85	44.01	40.0	UK213	H2313	1.91
	2-3/16													HA2313	2.10
	2-1/4													HE2313	2.04
		65	75	130	30	43	73	9.2	15	98	50.85	49.30	UK215	H2315	2.56
	2-1/2													HE2315	2.65
		70	80	140	33	46	78	9.6	17	105	55.04	53.31	UK216	H2316	3.23
	2-3/4													HE2316	3.24
		75	85	150	35	48	82	10.5	18	110	63.98	63.69	UK217	H2317	3.93
	3													HE2317	3.84
		80	90	160	37	50	66	11.1	18	120	73.83	70.76	UK218	H2318	4.75 4.80
	3-1/8													HS2318