Three Point Suspension Centrifuge

Three Point Suspension Centrifuge
Three Point Suspension Centrifuge
Request a Quote

As a bottom discharge filter centrifuge, the SX three point suspension centrifuge requires little user interaction but is able to deliver satisfying performance. Mainly intended for the separation of small to medium sized solid particles (0.01mm) suspended in liquids, it is also applicable for crystallized suspension and fiber materials.

Main Characteristics of Three Point Suspension Centrifuge
Aside from the merits of traditional three point top discharge centrifuge, this three point suspended centrifuge also exhibits many other outstanding properties.
1. Due to the implementation of bottom discharge, labor intensity is reduced to a large extent, and working efficiency is significantly improved at the same time.
2. Since the discharge process is conducted manually instead of by a scraper, there is no need to install a scraper. From this point of view, this separation equipment is a great choice for conditions where solids are not allowed to get damaged.
3. All the components that will come into contact with liquid are manufactured from stainless steel, and customers could specify other materials according to their needs.

Owing to the abovementioned properties, the three point suspension centrifuge is commonly used in chemical, food, pharmaceutical and other industries.

Technical Data of Three Point Suspension Centrifuge
Model SX-800 SX-1000 SX-1250
Drum diameter (mm) 800 1000 1250
Drum speed (r/min) 1500 1200 1000
Max. separating factor 1007 805 698
Drum capacity (L) 90 140 250
Loading capacity (kg) 135 200 300
Motor model Y132M-4 Y160M-4 Y180M-4
Motor power (kW) 7.5 11 11
Transmission type V-belt - 18.5
Structure of Three Point Suspension Centrifuge
1. Drain Hole
2. Pedestal
3. Chassis
4. Bearing Seat
5. Boom
6. Spring
7. Drum
8. Housing
9. Shaft
10. Bearing
11. Bolt
12. V-belt
13. Motor
14. Centrifugal Clutch
Related products
Send Message
Other Products
Inquiry
Inquiry