Servo System for Wood Engraving Machine
CNC Wood Engraving Machine Structure
The CNC wood engraving machine is made up of 4 parts.
1. Computer
2. Servo system
3. Variable frequency drive
4. Mechanical structure
The servo system requires 3 sets of servo motors and servo drives, each controlling motion along the X-, Y-, and Z-axis separately. The variable frequency system comes with 6 high-speed motors and 6 variable frequency drives. The mechanical structure comprises 3 lead screws and 3 guide rails installed separately along the X-, Y- and Z-axis. It also contains a worktable where the workpiece is clamped in place.
Applications
CNC wood engraving machine with servo system is widely used in furniture, furnishing, upholstery, doors, wood crafts, copper, aluminum, light accessories, stones, glass, and other machining industries.
Model Selection
| Servo Drive | Servo Motor | |
| X-axis | F-08AT2 | 80SD02430E(S) |
| Y-axis | F-08AT2 | 80SD02430E(S) |
| Z-axis | F-08AT2 | 80SD02430EZ(S) |
Wiring
X-, Y-, Z-axis signal cords
1. Servo ready
2. Servo alarm
3. Motor braking output
4. DG output common port
5. Position command PULS (pulse)
6. Direction command SIGN (direction)
7. Metal casing for CN1 terminals
Please note that only the Z-axis is connected to the braking signal output while the other two axes do not have any braking requirements.
Parameter Settings
| X-Axis | Y-Axis | Z-Axis | |
| PA5 | 80 | 50 | 60 |
| PA6 | 20 | 30 | 20 |
| PA7 | 512 | 512 | 512 |
| PA8 | 512 | 512 | 512 |
| PA9 | 80 | 40 | 80 |
| PA32 | 1 | 1 | 1 |
| PA33 | 100 | 200 | 60 |
| PA48 | 0 | 0 | 100 |
| PA49 | 0 | 0 | 200 |
| PA53 | 1 | 1 | 1 |
